Advertisement
Special Setting
２．
In the special setting, the setting of output voltage and green mode
(saving energy mode) can be set at dip switch in the rear.
The setting of output voltage
２−１
can be set up by special setting as the following table.
It
ALS-5KH
Setting of ２００Ｖ
Switch１ down side
Switch２ down side
Setting of ２３０Ｖ
Switch１ down side
Switch２ up side
estart after you finish setting of output voltage. How to restart is to see the term
■R
of "Start-up", "Shut-down" in nine-page. It is the completion of the setup with this.
１０
At the setting of output voltage, use the switch1 and 2.
At the setting of Green Mode, use the switch 3.
200V
220V
A setup is reflected by the restart of the device.
230V
Setting of ２２０Ｖ
Switch１ up side
Switch２ down side
Setting of ２４０Ｖ
Switch１ up side
Switch２ up side
240V
Advertisement
