Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Franke FTC632XSAU
Summary of Contents for Franke FTC632XSAU
- Page 1 FTC632XSAU Instructions for use and installation Rangehood...
-
Page 2: Table Of Contents
INDEX SAFETY INFORMATION ..............................3 CHARACTERISTICS ................................6 INSTALLATION ..................................7 USE .....................................9 MAINTENANCE .................................10... -
Page 3: Safety Information
SAFETY INFORMATION For your safety and correct operation of the appliance, read this manual carefully before installation and use. Always keep these instructions with the appliance even if you move or sell it. Users must fully know the operation and safety features of the appliance. The wire connection has to be done by specialized technician. - Page 4 • If the extractor is used in conjunction with non-electrical appliances (e.g. gas burning appliances), a sufficient degree of aeration must be guaranteed in the room in order to prevent the backflow of exhaust gas. When the rangehood is used in conjunction with appliances supplied with energy other than electric, the negative pressure in the room must not exceed 0,04 mbar to prevent fumes being drawn back into the room by the rangehood.
- Page 5 • The appliance is not to be used by persons (including children) with re- duced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction. Accessible parts may become hot when used with cooking appliances. •...
-
Page 6: Characteristics
CHARACTERISTICS Dimensions Min. Min. 650mm 450mm Components Ref. Q.ty Product Components Hood Body, complete with: Controls, Light, Blower, Filters Directional Air Outlet grille Closing element Ref. Q.ty Installation Components Screws 4,2 x 44,4 Screws 4,2 x 12,7 Screws 2,9 x 12,7 Q.ty Documentation Instruction Manual... -
Page 7: Installation
INSTALLATION Drilling the Support surface and Fitting the Hood SCREW FITTING • The hood support surface must be 135 mm above the bottom surface of the wall units. • Drill the support with a ø 4,5 mm drill bit, using the drilling template provided. - Page 8 Connections DUCTED VERSION AIR EXHAUST SYSTEM When installing the ducted version, connect the hood to the chimney using either a flexible or rigid pipe ø120 mm, the choice of which is left to the installer. ø 120 • Fix the pipe in position using sufficient pipe clamps (not supplied).
-
Page 9: Use
Control panel M - V Light Switches the lighting system Light Switches the lighting system on and off. on and off. Motor Switches the extractor motor Motor Switches the extractor motor on and off. on and off. Speed Sets the operating speed of Speed Sets the operating speed of the extractor:... -
Page 10: Maintenance
MAINTENANCE Grease filters CLEANING METAL CASSETTE GREASE FILTERS • The filters must be cleaned every 2 months, or more frequently in case of particularly heavy use of the hood. Filters can be washed in a dishwasher. • Pull out the sliding suction panel. •... - Page 11 Lighting LIGHT REPLACEMENT • Remove the metal grease filters. • Unscrew the bulbs and replace them with new ones having the same characteristics. • Replace the metal grease filters. Lamp Power (W) Socket Voltage (V) Dimension (mm) ILCOS Code 220-240 107 x 37 DRBB/F-4-220-240-E14-35/100 DRPAR-5/840-220/240-GU10-35/36...
- Page 12 Franke S.p.a. Via Pignolini,2 37019 Peschiera del Garda (VR) www.franke.it 991.0565.875_ver1 - 181015 - D000000005316_00...
Need help?
Do you have a question about the FTC632XSAU and is the answer not in the manual?
Questions and answers