Table of Contents
Advertisement
Quick Links
dvbLOGiC DVB-T2 / DVB-T Tuner
Compatible with BMW E65 Professional
with old iDrive (E65) and menu button,
without factory rear-seat entertainment
Product features
• Full plug and play vehicle-specific dual DVB-T / DVB-T2 Tuner + USB-AV-Player
• DVB-T2 HEVC/H265/264 and DVB-T MPEG2/MPEG4 compatible
• Recording function for broadcasted TV
• AFS - auto frequency switching
• USB-AV-Player for USB-media (audio, video, photo) up to 2TB (FAT32 and NTFS)
• Support of all common Audio & Video formats (e.g MPEG-I/II/IV, H264, H265,
VOB, AVI, DivX, Xvid, MKV, TS, MOV, RMVB, mp3, WAV, AAC)
• USB-AV-Player with last position memory for Audio and Video playback
• with two active DVB-T glass-mount antennas and USB extension with installation socket
• integrated into and controllable by vehicle infotainment
• AV-input with IR-control channel
• control of after-market devices, e.g. DVD-player, DAB+ tuner
• after-market rear-view camera input
• automatic or manual switching to after-market rear-view camera input (only from
dvbLOGiC mode)
• rear-seat-entertainment AV-output for AV-sources connected to the dvbLOGiC
• optional remote control for full DVB-tuner and USB AV-Player functions/rear-seat-
entertainment
• power-on remote-out trigger-signal (+12V max 1A) to switch on connected devices
• video-in-motion
Version 25.09.2017
DT3-E65-TV
navigation systems
Vehicles with factory TV-tuner port
(Factory TV-tuner must be uninstalled)
DT3-E65-TV
Advertisement
Table of Contents
Related Manuals for Caraudio-Systems dvbLOGiC DT3-E65-TV
Summary of Contents for Caraudio-Systems dvbLOGiC DT3-E65-TV
- Page 1 dvbLOGiC DVB-T2 / DVB-T Tuner DT3-E65-TV Compatible with BMW E65 Professional navigation systems with old iDrive (E65) and menu button, without factory rear-seat entertainment Vehicles with factory TV-tuner port (Factory TV-tuner must be uninstalled) Product features • Full plug and play vehicle-specific dual DVB-T / DVB-T2 Tuner + USB-AV-Player • DVB-T2 HEVC/H265/264 and DVB-T MPEG2/MPEG4 compatible • Recording function for broadcasted TV • AFS - auto frequency switching • USB-AV-Player for USB-media (audio, video, photo) up to 2TB (FAT32 and NTFS) • Support of all common Audio & Video formats (e.g MPEG-I/II/IV, H264, H265, VOB, AVI, DivX, Xvid, MKV, TS, MOV, RMVB, mp3, WAV, AAC) • USB-AV-Player with last position memory for Audio and Video playback • with two active DVB-T glass-mount antennas and USB extension with installation socket • integrated into and controllable by vehicle infotainment • AV-input with IR-control channel • control of after-market devices, e.g. DVD-player, DAB+ tuner • after-market rear-view camera input • automatic or manual switching to after-market rear-view camera input (only from dvbLOGiC mode) • rear-seat-entertainment AV-output for AV-sources connected to the dvbLOGiC • optional remote control for full DVB-tuner and USB AV-Player functions/rear-seat- entertainment • power-on remote-out trigger-signal (+12V max 1A) to switch on connected devices • video-in-motion Version 25.09.2017 DT3-E65-TV...
-
Page 2: Table Of Contents
Contents 1. Prior to Installation 1.1. Delivery contents 1.2. Check compatibility of vehicle and accessories 1.3. Setting the dip switches of the CAN-box TV-436 1.4. Setting the dip switches of the tuner-box DT3C-M736 1.4.1. Automatic switching to rear-view camera 1.4.2. Deactivating dvbLOGiC AV input 2. Installation 2.1. Installation of CAN-box TV-436 2.2. Installation of tuner-box DT3C-M736 2.3. Antennas and optional IR-remote control set 2.4. USB-AV-Player 2.5. Connecting peripheral devices 2.5.1. AV-source 2.5.2. Installing AV-source’s IR-sensor additionally 2.5.3. After-market rear-view camera 2.5.4. After-market rear-seat-entertainment 2.5.5. -
Page 3: Prior To Installation
Legal Information By law, watching moving pictures while driving is prohibited, the driver must not be distracted. We do not accept any liability for material damage or personal injury resulting, directly or indirectly, from installation or operation of this product. This product should only be used while standing or to display fixed menus or rear-view-camera video when the vehicle is moving, for example the MP3 menu for DVD upgrades. Changes/updates of the vehicle’s software can cause malfunctions of the interface. We offer free software-updates for our interfaces for one year after purchase. To receive a free update, the interface must be sent in at own cost. Labor cost for and other expenses involved with the software-updates will not be refunded. 1. Prior to installation Read the manual prior to installation. Technical knowledge is necessary for installation. The place of installation must be free of moisture and away from heat sources. 1.1. Delivery contents Take down the SW-version and HW-version of the interface boxes, and store this manual for support purposes. USB-extension cable Tuner-box USBC-EXT DT3C-M736 Harness HW_____ SW_____ C2C-BM01 Harness TV-BM65 CAN-box TV-436 Harness HW_____ C3C-AVIR SW _____ Harness CAB-AV-6P 2pcs. antenna adapters ANT-FSMB-P 1.1. If remote function for a peripheral device shall be used, additional an IR-remote cable and Y-adapter are needed, see chapter AV-source . Version 25.09.2017 DT3-E65-TV... -
Page 4: Check Compatibility Of Vehicle And Accessories
1.2. Check compatibility of vehicle and accessories Requirements Vehicle 7series (E65/E66) Navigation Navigation system Professional E65 with old iDrive and menu button, without factory rear-seat entertainment Vehicles with TV-tuner port Limitations factory-TV-tuner Must NOT be installed. If uninstalled, optical ring must be closed. factory DVD-changer After-market rear-view camera cannot be connected to or factory nightvision the dvbLOGiC interface. Teletext Teletext of the dvbLOGiC can only be used with the optionally available C3-IRSET remote control set. After-market rear-view cam Only works from dvbLOGiC mode, not from OEM. 1.3. Setting the dip switches of the CAN-box TV-436 All vehicles dip 1 ON, dip 2 OFF, dip 3 OFF Version 25.09.2017 DT3-E65-TV... -
Page 5: Automatic Switching To Rear-View Camera
1.4. Setting the dip switches of the tuner-box The default dip switch settings of the tuner-box need to be changed ONLY if a rear-view camera is or shall be connected or if the AV of the dvbLOGiC shall be deactivated. The dip switches are located inside the tuner-box. For changes it is necessary to open the box. Default settings are: Dip1 = ON, Dip2 = OFF, Dip3 = OFF 1.4.1. Automatic switching to rear-view camera If an after-market rear-view camera shall be connected or a factory rear-view camera is connected, in order for the dvbLOGiC to automatically switch to its camera input, when reverse is engaged Dip switches set dip2 = ON (up). of tuner-box Note: Automatic switching works only from dvbLOGiC mode. 1.4.2. Deactivating dvbLOGiC AV input If no peripheral AV-source shall be connected to the dvbLOGiC, we recommend to disable the AV-input, to avoid customers switching by Dip switches mistake to black/no picture of the AV-input. In order to disable the of tuner-box AV-input of the dvbLOGiC, set dip1 = OFF (down). Version 25.09.2017 DT3-E65-TV... -
Page 6: Installation
2. Installation Switch off ignition and disconnect the vehicle’s battery! If according to factory rules disconnecting the battery has to be avoided, it is usually sufficient to put the vehicle in sleep-mode. In case the sleep-mode does not show success, disconnect the battery with a resistor lead. Complete and correct function of the interface is possible only when CAN and MOST® (tuner) connections are made properly. On vehicles without TV-icon, it will be coded automatically after installation. Place of installation is at the rear of the navigation screen and at the rear of the navigation computer. Note: The loose white and green cable of harness TV-BM65 are not required and must be isolated. Version 25.09.2017 DT3-E65-TV... -
Page 7: Installation Of Can-Box Tv-436
2.1. Installation of CAN-box TV-436 The CAN interface is connected to the backside of the OEM screen. Remove 3 TORX screws at the OEM screen. Remove cover grill (only plugged). Place soft towel beneath the navigation monitor to avoid scratches Flip down the board monitor. NOTE: The OEM screen gets stuck with its connector at the upper side of the cockpit. Insert a hard plastic sheet like a credit card to prevent cockpit from taking damage. Remove the black connector at the backside of the screen as shown below. Version 25.09.2017 DT3-E65-TV... - Page 8 Remove 12-pin insert from black vehicle harness connector. Insert 12-pin insert into black connector of the CAN interface harness TV-BM65. Insert the completed black connector into CAN interface harness TV-BM65. Connect 12-pin insert from CAN interface harness TV-BM65 into black connector from vehicle harness. Insert completed connector into the plug on the backside of the navigation monitor. Connect 8pin Molex connector of TV-BM65 to CAN-box TV-436. NOTE: Pictures do NOT show the fibre optics connected in car! Version 25.09.2017 DT3-E65-TV...
-
Page 9: Installation Of Tuner-Box Dt3C-M736
2.2. Installation of tuner-box DT3C-M736 The fibre optical interface installation is made at the navigation computer, which is located at the left side in the trunk behind a cover and has to be removed. The factory TV-tuner must be uninstalled. Remove the factory optical leads of the factory TV-tuner port (blue female connector) and connect it to the black male MOST®-connector enclosed to harness C2C-BM01. Pay attention to the directional arrow on the optical lead connectors. Connect the black male MOST®-connector to the female MOST®-connector on the rear of the tuner-box DT3C-M736 (OPTICAL). Connect the blue male connector of harness C2C-BM01 to the factory TV-tuner port Picture exemplary (blue female connector). Version 25.09.2017 DT3-E65-TV... -
Page 10: Antennas And Optional Ir-Remote Control Set
2.3. Antennas and optional IR-remote control set Mount antennas ANT-12 and connect them to the female f-plug connectors on front of tuner-box DT3C-M736. We strongly recommend to first test the reception quality of the chosen mounting position of the antennas before final installation! See “Appendix C – Antenna positioning” for additional information. Connect the antenna adapters ANT-FSMB-P to the factory antennas of the vehicle. The C3-IRSET consists of the external C3C-SENSOR IR-sensor and the C3C-RC IR-remote control and can be used to control the dvbLOGiC’s internal DVB-T tuner functions additionally to the control through the navigations buttons. Connect the C3C-SENSOR to the female black/red/blue 3pin AMP connector of harness C3C-AVIR and locate the sensor in an accessible place. Note: To use the teletext function of the dvbLOGiC’s internal DVB-T tuner, the C3-IRSET is necessary to enter the page numbers. Version 25.09.2017 DT3-E65-TV... -
Page 11: Usb-Av-Player
2.4. USB-AV-Player Connect the USB extension USBC-EXT to the USB-port on the rear of the tuner-box DT3C-M736. Connect USB-media (up to 2TB, FAT32 and NTFS) to the USB-port of the USB- extension USBC-EXT. 2.5. Connecting peripheral devices It is possible to connect an after-market AV-source, after-market rear-view camera and rear- seat-entertainment to the dvbLOGiC Tuner. Also factory nightvision, factory DVD-changer or factory rear-view camera must be connected to the dvbLOGiC-Tuner. Before final installation of the peripheral devices, we recommend to test-run the dvbLOGiC functions to detect incompatibility of vehicle, navigation, factory accessories or peripheral devices as soon as possible. Version 25.09.2017 DT3-E65-TV... -
Page 12: Av-Source
2.5.1. AV-source The dvbLOGiC has the possibility to connect and remotely control by navigation buttons a pre-programmed device. The device list in the device control table shows the pre- programmed remote channels and the related IR-remote cables STA-xxx which must be ordered separately for the control of the device. Using the respective STA-xxx IR-control cable, interconnect the yellow female 3pin AMP connector of harness C3C-AVIR and the IR-port of the AV-source. Using an RCA-cable, interconnect the female RCA-port of harness CAB-AV-6P with the AV-output of the AV-source. The pink ACC-output wire (+12V max 1A) of harness C2C-BM01 can be connected to the ACC-input wires of the connected device to switch it on. It carries +12V when the navigation computer is running. 2.5.2. Installing AV-source’s IR-sensor additionally Additionally to the control via OEM navigation, it is possible to install the original IR-sensor of a connected device. By using the respective Y-adapter (e.g. STA-Y35MM or STA-RJ12) for the IR-Port of the connected device, the controls of navigation AND device’s IR-sensor can be connected and used simultaneously. Installation of the IR-sensor is recommended as the controls via navigation are limited, and not all functions may be covered. Version 25.09.2017 DT3-E65-TV... -
Page 13: After-Market Rear-View Camera
2.5.3. After-market rear-view camera Connect the video RCA of the after-market rear-view camera to the the female RCA connector RVC of tuner-box DT3C-M736. Connect the green wire of C2C-BM01 to the camera power supply (+12V max. 1A). The green wire is high (+12V) when reverse gear is engaged. On some vehicles the reverse light signal doesn’t exist on the CAN-bus. Connect the white wire of harness C2C-BM01 to reverse light signal (+12V of reverse light) if the dvbLOGiC doesn’t switch to the rear-view camera automatically. Note: Automatic switching to after-market rear-view camera works only from dvbLOGiC mode. Version 25.09.2017 DT3-E65-TV... -
Page 14: After-Market Rear-Seat-Entertainment
2.5.4. After-market rear-seat-entertainment Using RCA-cables, connect the rear-seat-entertainment to the female RCA-connector VIDEO OUT of harness C3C-AVIR. Note: As the output is a full output, not shared with the video signal for the navigation system, splitting the video with an RCA Y-cable might give a good enough picture for two rear-seat-entertainment monitors. If not, or if connecting more than two monitors, use a video splitter. 2.5.5. Factory nightvision, factory DVD-changer, factory rear-view camera On vehicles with factory nightvision, factory DVD-changer or factory rear-view camera, pin out the video-signal and video-signal ground from the white 18pin AMP connector of the vehicles harness (rear of navigation computer) and connect them by male RCA-connector to the R-CAM IN of tuner-box. Navi Video-signal Video-signal ground E65 Pin 1 (yellow-black) Pin 10 (green) The factory component will work as before. Version 25.09.2017 DT3-E65-TV... -
Page 15: Operation
3. Operation 3.1. Activation of the video-in-motion function The video-in-motion function is permanently active without disturbing the navigation performance. 3.2. Selecting the dvbLOGiC as current AV-source In the vehicle’s main menu, select Infotainment and then TV by iDrive to choose the dvbLOGiC as current AV-source. 3.3. Assigning device control for connected AV-source After selecting the dvbLOGiC as current AV source, push iDrive knob to open the dvbLOGiC control menu. Select control levels setup “AV: RCxx” and assign related IR-code as described in device control table. Note: If the AV-input is deactivated (see chapter 1.4.2.), the menu items “AV” and “AV: RCxx” will not be available. 3.4. Switching to internal DVB-T, AV-source or after-market rear-view camera In the dvbLOGiC control menu, choose TV to enter internal DVB-T tuner mode, AV to enter AV-input mode (not available if AV-input is deactivated, see chapter 1.4.2) or REAR CAM to switch to the dvbLOGiC after-market rear-view camera-input (even if the automatic switching to the camera input is disabled, see chapter 1.4.1.). After selection the menu will close automatically and switch to the selected source. The iDrive knob, some multi-function- steering wheel buttons (MFSW) and some navigation buttons (HU) are now available for remote functions (see assignment table for iDrive below). By pressing the iDrive-MENU-button, the system returns to the factory iDrive functions. By pressing the iDrive knob again, the dvbLOGiC control menu will be re-entered. Version 25.09.2017 DT3-E65-TV... -
Page 16: Button Assignment Table Idrive
3.5. Button assignment table iDrive The button assignment table shows which functions of dvbLOGiC and additionally connected devices can be executed by iDrive. Once DVB-T or AV-input mode are activated the iDrive action in the left column will execute the function described in the corresponding device column. The function description equals the remote control buttons of the optional dvbLOGiC remote control or the additional device. On the additional device the writing may vary (e.g. AV instead of Source). iDrive action Device Internal DVB-T DAB on AV-input DVD on AV-input DVC on AV-input iPod interface on AV- input Menu long MENU SETUP Setup Setup Setup Menu short Return to factory Return to factory Return to factory Return to factory iDrive Return to factory iDrive functions iDrive functions iDrive functions functions iDrive functions Options long POWER Audio Audio KCE: Light Bulb, Vlink: Subtitle Options short Subtitle Subtitle KCE: lower vol, Vlink:... -
Page 17: Specifications
4. Specifications Operation voltage 10.5 – 14.8V DC Stand-by power drain <1mA Operation power drain <1200mA Power consumption <16,5W Temperature range -30°C to +80°C Weight 333g Measurements (box only) B x H x T 140 x 30 x 105 mm 5. Technical Support Caraudio-Systems Vertriebs GmbH manufacturer/distribution In den Fuchslöchern 3 D-67240 Bobenheim-Roxheim email support@caraudio-systems.de Legal disclaimer: Mentioned company and trademarks, as well as product names/codes are registered trademarks ® of their corresponding legal owners. Version 25.09.2017 DT3-E65-TV...
Need help?
Do you have a question about the dvbLOGiC DT3-E65-TV and is the answer not in the manual?
Questions and answers