Do-It-Yourself Procedures; To Lock Keys; To Activate Sabbath Mode; To Change Temperature Calibration - Bosch 700 Series Use And Care Manual

The following features are changed through the special
features screen. To access the special features screen:
1. Press and hold COOKING MODE for 3 seconds
until clock time disappears.
The following four messages will appear, one
screen after another:
OVEN SETTINGS HELP SCREENS PLEASE READ
TO EXIT AND LOSE CHANGES PRESS CANCEL
TO EXIT AND KEEP CHANGES PRESS START
TO BEGIN TURN KNOB THANK YOU

To Lock Keys:

Use the Lock Keys feature to lock the panel. The mode
cannot be changed while the feature is activated.
1. Access the special features screen as explained
above.
2. Turn knob to select LOCK KEYS.
3. Press COOKING MODE.
4. Press START.
The cooking mode is not cancelled when the panel
is locked. Press CANCEL to turn the mode off.
The timer is cancelled when the panel is locked.
5. Press and hold COOKING MODE to unlock
panel.

To Activate Sabbath Mode:

When selected, oven bakes continuously until the
mode is cancelled. The mode is Sabbath compliant for
religious faiths with "no work" requirements on the
Sabbath.
Before the feature can be selected, it must be set up in
the special features screen:
1. Access the special features screen as explained
above.
2. Turn knob to select SABBATH MODE.
3. Press COOKING MODE
4. Turn knob to select YES.
5. Press START.
Afterwards, the Sabbath feature can be selected from
the cooking mode menu:
6. Press COOKING MODE.
7. Turn knob to select SABBATH.
8. Press TEMPERATURE and turn knob to set
temperature.
9. Press START.
The oven does not beep during the Sabbath mode.
Only the CANCEL button will operate.
Press CANCEL to cancel the mode.

Do-It-Yourself Procedures

To Change Temperature Calibration:

The electronic thermostat has been carefully calibrated;
However, if the browning results are too light or too
dark for your preferences, you can raise or lower the
setting.
1. Access the special features screen as explained
above.
2. Turn knob to select OVEN OFFSET 1 or OVEN
OFFSET 2 (OVEN OFFSET 1 changes the calibration
in the upper oven. OVEN OFFSET 2 changes the
calibration in the lower oven).
3. Press COOKING MODE
4. Turn knob to increase or decrease the
temperature in 5° increments.
5. Press COOKING MODE.
6. Press START.

To Change Display Language:

The commands in the display can be shown in English,
French or Spanish. The default language is English.
1. Access the special features screen as explained
above.
2. Turn knob to select LANGUAGE.
3. Press COOKING MODE
4. Turn knob to select EnG (English), ESP (Spanish)
or FrA (French).
5. Press COOKING MODE.
6. Press START.

To Change Temperature Format:

The oven has been preset to a Fahrenheit temperature
format; However, it can also use a Celsius temperature
format.
1. Access the special features screen as explained
above.
2. Turn knob to select SELECT UNITS.
3. Press COOKING MODE
4. Turn knob to select format (choose °C or °F).
5. Press COOKING MODE.
6. Press START.
English • 21