Table of Contents
Advertisement
Environment
Environment
The recommended operating environment for the multiplexer is:
Multiplexer Description
The Keysight E1460A 64-channel relay multiplexer module is an " instrument" in
the slot of a VXIbus mainframe. Each module is assigned an error queue, input
and output buffers, and a status register.
Multiplexer Specifications
Specifications are listed in Appendix A of the Keysight E1460A User's Manual.
These specifications are the performance standards or limits against which the
module may be tested.
Multiplexer Serial Numbers
Devices covered by this manual are identified by a serial number prefix listed on
the title page. Keysight Technologies uses a two-part serial number in the form
XXXXAYYYYY, where XXXX is the serial prefix, A is the country of origin
(A=U.S.A.), and YYYYY is the serial suffix. The serial number prefix identifies a
series of identical instruments. The serial number suffix is assigned sequentially
to each instrument. The serial number plate is located on the right-hand shield
near the backplane connectors.
Multiplexer Options
There are no electrical or mechanical options available for the 64-channel relay
multiplexer module.
Keysight E1460A 64-Channel Relay Multiplexer Service Guide
Environment
Temperature
°
Operating
0
C to +55
°
Storage and
-40
Shipment
Instruments are based on the logical addresses of the plug-in
modules. See the Keysight 75000 Series C Installation and Getting
Started Guide to set the addresses to create an instrument.
Humidity
°
C
<65% relative (0
°
C to +75
C
<65% relative (0
General Information
°
°
C to +40
C)
°
°
C to +40
C)
19
Advertisement
Table of Contents
