Table of Contents
Advertisement
Page 13
Section 9 - Servicing
9.0 SERVICING SCHEDULE
Note – when working with the unit, supply services when connected could reach 85°C, and
once electrically connected the unit has 230V present within.
It is recommended that the unit is serviced once every 12 months to maintain its efficiency
and longevity.
9.1
Servicing the Strainer (Part 15 – Figure 9)
Isolate the unit from district supply. Open the screw cap from the strainer and take
the filter cartridge out. Depending on the condition either clean it or replace it and
put the screw cap back on again. Note the district water in the strainer could be
85°C.
-V3 DIRECT
Advertisement
Table of Contents
Need help?
Do you have a question about the HIPER-V3 DIRECT and is the answer not in the manual?