Security Screen Options - Dell Latitude 5289 Owner's Manual

Security screen options

Option Description
Admin Password Allows you to set, change, or delete the administrator (admin) password.
Default setting: Not set
System Password Allows you to set, change, or delete the system password.
Default setting: Not set
Strong Password Allows you to enforce the option to always set strong passwords.
Default Setting: Enable Strong Password is not selected.
Password Allows you to specify the minimum and max password lengths of the Administrator and System passwords.
Configuration
•
•
Password Bypass Allows you to enable or disable the permission to bypass the System and the Internal HDD password, when they
are set. The options are:
•
•
Default setting: Disabled
Password Change Allows you to enable the disable permission to the System and Hard Drive passwords when the admin password is
set.
Default setting: Allow Non-Admin Password Changes is selected.
Non-Admin Setup Allows you to determine whether changes to the setup options are allowed when an Administrator Password is set.
Changes If disabled the setup options are locked by the admin password.
Option "allow wireless switch changes" is not selected by default.
UEFI capsule This option controls whether the system allows BIOS updates using UEFI capsule update packages. This option is
firmware updates enabled by default
TPM 2.0 Security Allows you to enable the Trusted Platform Module (TPM) during POST. The options are:
•
•
•
•
•
NOTE: You must set the admin password before you set the system or hard drive password. Deleting the
admin password automatically deletes the system password and the hard drive password.
NOTE: Successful password changes take effect immediately.
NOTE: Successful password changes take effect immediately.
NOTE: If Strong Password is enabled, the Admin and System passwords must contain at least one
uppercase character, one lowercase character and be at least 8 characters long.
min-4—by default, if you want to change you can increase the number
max-32—you can decrease the number
Disabled
Reboot bypass
TPM On—enabled by default
Clear
PPI Bypass for Enable Commands—enabled by default
PPI Bypass for Disabled Commands
Attestation enable—enabled by default
System Setup (Configuración del sistema) 67