Page 1
Battery Powered Gearmotor SD type Detailed Instruction Manual <Read this Manual before using the product.> APG(Inline Shaft) AFC(Right Angle Hollow Bore) NISSEI CORPORATION...
Introduction Thank you very much for purchasing our product. Safety Precautions ・Be sure to carefully read the contents described in this instruction manual and to understand how to use product correctly before using it. ・The extent of hazard/damage expected to occur in the case of improper handling are classified and indicated in ranks of “DANGER”, ”WARNING”, and ”CAUTION.”...
Page 3
Warning ■General The operators in charge of installation, piping, wiring, operation, handling, maintenance, and inspection should have enough knowledge and technical skill related to the product. Failure to follow this precaution may result in fire, electric shock, injury, and/or damage to the application. Do not repair, disassemble or remodel the product.
Page 4
Caution ■Transportation The product must be transported correctly in accordance with its weight. Failure to follow this precaution may result in injury and/or malfunction. Do not transport the gearmotor by holding the cable or the output shaft. Failure to follow this precaution may result in damage to the application and/or injury.
Table of contents Introduction Safety precautions 1. Before Using This Product P.6 Names of Parts P.6 Inspection upon Unpacking P.6 Information provided on Nameplate P.7 Gearmotor Model 2. Connection method and Installation P.8 Connection method P.9 Motor signal line and Power line P.9 Installation 3....
1. Before Using This Product 1-1 Names of Part ■Gearmotor *Its appearance differs according to classification by mount form. Name Name Output shaft Motor power line Assembling Flange Motor signal line Gearhead Brake Bracket Brake lead wire Motor 1-2 Inspection upon Unpacking ■...
1-3 Information provided on Nameplate The following is a typical nameplate. Description Gearmotor Model Motor Power Reduction ratio Rated Voltage IP Rating Insulation class Rating Manufacturing No.(MFG NO.) QR code ・ Check the following chart for Gearmotor Model. ・ In case of inquiry, inform us the Gearmotor Model and MFG NO. 1-4 Gearmotor Model The contents of Gearmotor Model's codes are as follows.
Make the motor power line as short as possible in order to avoid deterioration of motor characteristics. brake lead wire. ■Example of connecting to Nissei Driver PC connection cable [1 m] (option) Connected to PC Motor signal line [0.5 m] Motor power line [0.5 m]...
2-2 Motor signal line and power line ■Signal line colors and functions Line color Function Yellow Pole sensor power supply (15 V for Nissei driver) U-phase pole signal output (open collector) White V-phase pole signal output (open collector) Black W-phase pole signal output (open collector) Green ■Connector pin configuration...
Page 10
■ Installation Orientation No restriction on installation orientation. (Since it uses a grease lubrication system) ■ Installation Procedure Secure the gearmotor with four bolts on a vibration-free and flat machine-processed surface. If the foundation is bad or the mounting surface is not flat enough, vibration may occur during operation and the service life of the gearmotor may be shortened.
Page 11
■Connecting with Inline Shaft(APG) ●Against solid shaft ●Against hollow Bore (Tightening with ball screw, etc.) (Tightening with pulley, etc.) Commercial Commercial flexible coupling tightening device ■Connecting with other equipment For connecting the reducer to the other equipment, be sure to observe following points. ●"H7"...
3. Specifications and Performance 3-1 Motor and Electromagnetic Brake Specifications ■Motor Specifications Motor Battery Powered Brushless Motor Motor Power 0.75 kW Voltage DC 48V Rated Current 19.5 A Rating S3 25% Motor Lead Wire Size (AWG14) 2 mm Maximum Extended Length Ambient Temperature 0〜40 ℃...
* In the graphs below, 100% corresponds to output allowable torque in the performance tables. 0.75kW 48V Typical Characteristics Load ratio - Rotational speed Load ratio - Current Load Coefficient(%) When using a Nissei Driver Used within the rated speed range (80 to 3000 r/min) at 100% load factor.
3-3 When making a driver ■Type and specifications of Hall IC Manufacturer Asahi Kasei Micro devices Model EW-710B Power Supply Voltage Output Current 15mA Operating Temperature -20〜115℃ ■Excitation pattern ・It rotates in the forward direction as illustrated below. ・Excitation current flows in the reverse direction through the power lines when rotating in the reverse direction. Signal transition Flow from W to U Flow from W to V...
4. Maintenance, Service Life, and Inspection 4-1 Maintenance and Service Life ■Gearmotor ・ All the models that we offer utilize grease for lubrication so replacement and replenishment of the grease is not required. The gearmotor is designed for 10,000 hour mark. ・...
Page 16
5. Storage 1.Storage location (1) When the product is stored, it shall be stored in a dry place indoors, with good ventilation, without direct sunlight, extreme temperature change, humidity, dust, and/or corrosive gas. (2) Do not directly place the product on the ground when it is stored. (3) If there is a micro vibration the bearing may be damaged by fretting corrosion even when the product is stored.
Battery Powered Gearmotor SD type Detailed Instruction Manual (this manual) Name Detailed instruction manual with wiring method of the gearmotor, notes, etc. Description https://www.nissei-gtr.co.jp/pdf/data/gtr/manual/sd/battery-msd-e.pdf Battery Powered Driver SD type Detailed Instruction Manual Name Deatiled Instruction Manual for the Specialized Driver including details of Description Parameters, etc.