Advertisement
Jupiter125_402104_3L_1112806.indSec6:6-Sec3:3 Sec6:6-Sec3:3
Jupiter125_402104_3L_1112806.indSec6:6-Sec3:3 Sec6:6-Sec3:3
TIPS
• Always put item in a pouch. Never laminate an empty pouch.
• Trim excess pouch material from around your item after laminating
and cooling.
BEFORE YOU LAMINATE
Use Fellowes® brand pouches
(Enhance3 – Protect5) for best
results. Select correct pouch
thickness and size for laminated item.
COLD LAMINATION STEPS
CAUTION: Only use self-adhesive pouches when laminating with a cold setting.
1
2
1. Connect power cable to power
2. Switch laminator on with
and to inlet at back of laminator.
Power On / Off button at back
of machine
5
6
5. Centre item on clear side against
6. Peel a small part of the protective
sealed edge; documents cannot be
sheet away from document.
repositioned once laminated.
• Before laminating valuable items, do a test run with an item similar
in size and thickness.
• Do not laminate heat-sensitive documents (i.e., tickets, ultrasounds, etc.)
• Use a dry-erase marker for writing on laminated pouches.
Position laminator
so you have enough
space to allow
items to pass freely
through the machine.
3
4
80
100
125
COLD
80
125
mic
175
mic
100
175
mic
mic
??
HELP? TEMP
3. Press Stand-by button at left
4. Use navigation keys to select
of front operating panel to switch
setting for cold lamination
laminator on.
7
7. Place pouch, sealed edge fi rst,
into laminator entry. Keep pouch
straight and use the edge guide
to centre it. Continue peeling the
protective sheet away.
11/28/06 10:30:32 AM
11/28/06 10:30:32 AM
3
Advertisement
