Advertisement
ENGLISH
ENGLISH
ENG
Opening lid to clean
laminating mechanism
Discrete carry
handles at side
Active Cooling System
Temperature controlled
release trigger for lid
CAPABILITIES
Pouch Thickness
3-7 mil (75-175 microns)
Estimated Heat-Up Time
Approximate Cool-Down Time
Lamination Speed
Maximum Width
Voltage
Frequency
IMPORTANT SAFETY INSTRUCTIONS — Please Read Before Using!
• The socket-outlet shall be installed near the equipment
and shall be easily accessible.
• To prevent electrical shock, do NOT use laminator close to water
and do NOT spill water on laminator, electric cord, or wall socket.
• Do not leave electric cord in contact with a warm surface.
• Do not leave electric cord hanging from a cupboard or shelf.
• Do not use laminator if electric cord is damaged.
• Do not laminate metal objects.
IMPORTANT SAFETY INFORMATION
This laminator is equipped with an Auto shut-off function. It will turn the laminator into
stand-by mode, if it has not been used of over 60 minutes. To switch the laminator
back on, simply press the stand-by button at the left of the front operating panel.
2
Jupiter125_402104_3L_1112806.indSec2:2-Sec7:7 Sec2:2-Sec7:7
Jupiter125_402104_3L_1112806.indSec2:2-Sec7:7 Sec2:2-Sec7:7
HeatGuard Technology™ double-walled
insulation keeps heat inside
LED Interface for
user guidance
g
LED Panel
cold 80 100 125
Enter
LED Interface Key
Support Shelf on entry to
guide laminate path
80
100
125
175
Stand By
Open
175 jam wait rev
Down Reverse
Left
Laminating capacity – 3-7 mil hot laminating pouches
4 Minutes
Up to tabloid size width (13")
60 Minutes
1000 Watt
18"/minute
Dimensions: 21 7/8" (w) 9 5/8" (d) 4 3/4" (h)
13"
Max document thickness 1/32"
120V
60 Hz
• Only use pouches specifi cally designed for the lamination setting you intend to use.
• Always supervise children during laminator operation.
• Keep pets away from laminator while in use.
• Switch off and unplug laminator when not in use.
• Only open the laminator as explained under "Maintenance". Do not open or
attempt to repair in any other way, as this could result in electric shock and will
void your warranty. Contact Customer Service if you have questions. Please note
the warranty does not apply in cases of abuse, mishandling or unauthorized repair.
During lamination, the direction of the pouch can be reversed, if you are unsure about
the progress of the lamination. To do so, press down the reverse key. This will eject
the pouch back at the front entry.
Up
Right
11/28/06 10:30:31 AM
11/28/06 10:30:31 AM
Advertisement
