High Altitude - Precision VS11856 User Manual

2-3-4 Timers
Timer settings
▲ ▼
Use and to navigate the Timers Sub-Menu (Fig. 2-3-4) Selections.
Press to confirm the Sub-Menu selection.
Press to go to previous menu.
Reset Lamp timer. Reset Lamp timer after each replacement of
LAMP
TIMER RESET
new lamp.
This timer is for user's own tracking purpose; the lamp
warranty time will not be renewed by this act. (See section ???
for lamp warranty details.)
FILTER
TIMER RESET
Reset filter Timer. Reset filter timer after each cleaning or
replacement of new filter.
SYSTEM TIME
00100 HRS
Fig. 2-3-4
Timers Sub-Menu
Total Projector operating time (Operating timer cannot be
changed by user).
LAMP TIMER RESET
YES NO
FILTER TIMER RESET
OFF ON
SYSTEM TIME
00100 HRS

2-3-5 High Altitude

Using Projector in high altitude. Projector fan spins faster to accommodate the low-
atmospheric pressure environment.
▲ ▼
Use and to navigate Selections of High Altitude Sub-Menu (Fig. 2-3-5).
Press to confirm the Sub-Menu selection.
Press to go to previous menu.
HIGH
HIGH
ALTITUDE
ALTITUDE
ON
ON
HIGH
ALTITUDE
OFF
HIGH
ALTITUDE
OFF
Fig. 2-3-5
High Altitude Sub-Menu
ON: Projector is used in high altitude.
High fan speed mode.
OFF: Projector is not used in high altitude.
Normal fan speed mode.
ENG