Projector Settings - Precision VS11856 User Manual

2-3-1 Projector Settings

Projector Setting selections
▲ ▼
Use and to navigate Selections of Projector Settings Sub-Menu (Fig. 2-3-1)
Press to confirm the Sub-Menu selection.
Press to go to previous menu.
AUTO SOURCE
Automatically select the next active input source
ON
Select ON to enable the feature; OFF to disable the feature
FIXED SYNC
OFF
AUTO
SHUTDOWN
OFF
Use default timing data stored in the projector instead of
LAMP MODE consistent auto sync sampling. Auto sync will cause incorrect
NORMAL
image sizing If the on-screen image has black border. The
DAYLIGHT
SENSOR
problem is further complicated if the source content's screen
AUTO
resolution is not consistent.
PROJECTION
FRONT/DESK
Select ON to enable the feature; OFF to disable the feature
Fig. 2-3-1
Projector Settings Sub-Menu
Automatically shut down the projector after standby 5 / 15 /
30 / 45 / 60 minutes or feature off.
AUTO SOURCE
OFF ON
FIXED SYNC
OFF ON
AUTO
5 15 30 45 60 OFF
SHUTDOWN
LAMP MODE
NORMAL
ECO
Select lamp power efficiency mode
Normal: Standard mode, maximum lumen and power output
Eco: Reduced power, less fan noise, and lamp life can be
extended.
DAYLIGHT
OFF AUTO MANUAL
SENSOR
Adjust the viewing condition based on ambient light environment
OFF: Disable the feature
Auto: Enable the feature and adjust automatically
Manual: Enable the feature and adjust manually
MANUAL
LOW MIDDLE HIGH
Manually choose the light rate.
Low: Dim environment
Middle: Average light environment
High: Bright environment
PROJECTION
FRONT / DESK REAR / DESK
FRONT / CEILING REAR / CEILING
Projection method selections
▲ ▼
Use and to choose the right projection method.
ENG