Table of Contents
Advertisement
Setup Menu — To set up OSD window
When input source is TV/ AV/ S-Video/
YPbPr/ HDMI:
＊ For China area:
• OSD Language: To select the language of OSD from Simply Chinese, English, Traditional
Chinese.
• OSD H-Position: To adjust the horizontal position of OSD.
• OSD V-Position: To adjust the vertical position of OSD.
• OSD Timeout: To automatically shut off the OSD after a preset period of time passed. Use
◄►to preset the time from 5 to 60 seconds.
• Aspect Ratio: Press ◄► to select image size between Full, Zoom, 4:3, and Panorama.
• Over Scan: Turn screen overscan on/off for HDMI (480p, 720i, 1080p).
• Noise Reduction: To adjust the picture noise reduction function. This function can reduce
the picturemnoise and particularly useful in the area that has trouble in signal receiving.
• Memory Recall: Press ► to restore the default settings.
TV-Channel Menu — To setup for TV
It is only active in TV source.
• System: To select the system of your local area, or select AUTO.
• Auto Scan: To automatically preset the channels into TVs memory. Kindly suggest you auto
scan all the channels before watching your TV for the first time.
Note: After auto scan all the channels, you need not to do it again when turning on your TV
next time.
*China TV system: PAL D/K and I.
ViewSonic
＊ For Hong Kong area:
E x i t
E x i t
15
When input source is PC/ HDMI-DVI:
E x i t
E x i t
＊ For China area
＊ For Hong Kong area:
:
E x i t
E x i t
E x i t
E x i t
VT2430
Advertisement
Table of Contents
