Getting Started - Levoit LV-PUR131 User Manual

G E T T I N G S TA R T E D
Open the back cover of the air purifier
1.
and remove both filters from their plastic
packaging. [Figure 1.1]
First, place the Activated Carbon Filter
2.
back into the air purifier. Then, place
the Preliminary/True HEPA Combination
Filter. Make sure the pull tabs on both
filters are facing out.
Replace the back cover by lining up the
3.
cover's feet with the matching slots on
the bottom of the housing. Make sure
that the triangular piece at the bottom of
the cover is touching the safety switch.
[Figure 1.3]
Push the cover closed.
4.
5. Place the air purifier on a hard,
flat surface. Leave 15 in / 38 cm of
clearance on all sides of the air purifier.
[Figure 1.4]
Note: Do not remove the foam
piece attached to the dust sensor
cover unless instructed by
Support. [Figure 1.5]
Figure 1.1
[Figure 1.2]
Customer
Tabs facing
outward
Figure 1.2
Figure 1.3
15 in /
38 cm
Figure 1.4
Figure 1.5
Safety
switch
15 in /
38 cm
7