Remote Control And Tv Controls - ViewSonic N3290W User Manual

Using the TV Features

Remote Control and TV Controls

Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
Button
1 Power
2 FAVORITE
CH
3 0~9, - number
buttons
4 LAST
5 INFO
6 VOL▲▼
7 EXIT
8 ENTER
◀ ▶
▲▼
buttons
9 MENU
10 HDMI
11 YPbPr
12 PICTURE
13 MTS
20
Description
Press this button to turn the power on
from standby mode. Press it again to
return to the standby mode.
Press these buttons to select your
favorite channels that have already been
stored.
Press 0~9 and "-" to select a channel.
After you input the channel numbers,
press ENTER button to direct to the
channel immediately, or wait for 3
seconds to change automatically.
Press to return to previous channel.
Press this button to display the current
state of the LCD TV.
Press to adjust the volume.
Press to turn the OSD (On-Screen
Display) menu off.
Press to confirm the selection in the OSD
menu, or to enter the OSD menu you
select. Press ENTER after you input
channel numbers will change channels
immediately.
Press these buttons to navigate the OSD
◀ ▶
menus. ▲▼ is for function select,
and is for function adjustment.
Press to turn the OSD (On-Screen
Display) menu on or turn off the OSD
menu.
Press to select HDMI input
Press to select component (YPbPr) input
Press to select Brightness & Contrast
setting.
Press this button to choose the available
sound mode.
N3290w