Using The Tv Features; Remote Control And Tv Controls; Inserting Remote Control Batteries; Programming Your Cable Or Satellite Box Remote - ViewSonic N3290W User Manual

Using the TV Features

Remote Control and TV Controls

Inserting Remote Control Batteries

1. Remove the battery cover by pulling then lifting the knob on the cover.
2. Insert the batteries, corresponding to the (+) and (-) markings on the battery
compartment.
3.
Reattach the battery cover.
CAUTION
Only use the specified AAA batteries.
Do not mix new and old batteries. This may result in creaking or leakage, which
may pose a risk of fire or lead to personal injury.
Insert batteries according to (+) and (-) markings. Inserting the batteries
incorrectly may result in creaking or leakage, which may pose a risk of fire or
lead to personal injury.
Dispose of the battery in accordance with local laws and regulations.
Keep the batteries away from children or pets.
When the remote control will not to be used for an extended period, remove the
batteries.

Programming your Cable or Satellite Box remote

Refer the user manual from your service provider to determine the setting.
If the requires : '
3 digits, please try "566", "565", "556" or "688". It usually works with DISHNetwork.
4 digits, please try "0054", It usually works with Cox.
5 digits, please try "1154", 11054", or 10690". It usually works with DIRECTV.
Contact ViewSonic service team at: http://www.ViewSonic.com or call our service team: United States 1-800-688-6688, Canada 1-866-463-4775
ViewSonic
19
N3290w