7
Slide Axle (19) completely through Undercarriage (6); be sure to catch the drawbar
when sliding the Axle (19). Align drawbar with the Front Support (9) and press down
to latch.
8
Slide Washers (20) and Wheels (18) onto Axle (19) and secure with Hairpins (24). At
this time, tighten all hardware.
Attach the Support Bar (10) to body behind flange loosely using
9
hardware (21 & 22).
21
Assembly Instructions
9
10
19
6
22
6
19
20
18
MAKE SURE
VALVE STEM
IS FACING OUT
24
BEHIND
FLANGE