Related Manuals for Troy-Bilt TB-3048SS
Summary of Contents for Troy-Bilt TB-3048SS
- Page 1 TB-3048SS 12 cu ft STEELSWIVEL DUMP CART U.S. Patent No. 8,496,298 READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT 6004395 - REV A 2/20...
-
Page 2: Safety Rules
Safety Rules This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. Read and understand all safety rules and operating instructions before using this tractor attachment. -
Page 3: Warranty
Warranty IF YOU ARE MISSING PARTS DO NOT RETURN TO STORE Email cs@ohiosteel.com or call 1-800-652-2321, ext. 212 Before you call, please email our customer service team at cs@ohiosteel.com with the following: A description of the issue you are having Photos of the issue that include an overall view and detailed view from multiple angles If applicable, a short video showing the issue... -
Page 4: Tools Required For Assembly
Carton Contents 1 (x1) 2 (x1) 3 (x1) 4 (x1) 5 (x2) 8 (x1) 6 (x1) 7 (x1) 9 (x1) 11 (x1) 10 (x2) 15 (x2) 14 (x1) 13 (x2) 12 (x4) 32 (x46) (x1) 16 (x1) 33 (x46) TOOLS REQUIRED FOR ASSEMBLY: •... - Page 5 Assembly Instructions Place Body Halves (1 & 2) on a smooth flat surface so they are square, and fasten together with hardware (32 & 33) as shown. Attach Front Support (16) to Body Halves (1 & 2) and tighten hardware (32 & 33) as shown. Attach Undercarriage (11) to Body Halves (1 &...
- Page 6 Assembly Instructions Attach Front Gate (3) to inside of body as shown and tighten hardware (32 & 33). Align Corner (5) onto lip of Body Halves (1& 2) and Front Gate (3) with hardware (32 & 33) as shown. Insert Axle (9) into Undercarriage (11) halfway as shown. Center Spacer (14) inside Swivel Clevis (21) and align with Axle (9).
- Page 7 Assembly Instructions Slide Axle (9) completely through Undercarriage (11); be sure to catch the Swivel Clevis (21) and Spacer (14) when sliding the Axle (9) through. Align drawbar with the Front Support (16) and press down to latch. Slide Washers (12), Spacers (13), and Wheels (10) onto Axle (9) and secure with Hairpins (15) as shown.
- Page 8 Assembly Instructions Attach Corner Gussets (6 &7) to rear and sides of body and tighten with hardware (32 & 33) as shown. Attach Tailgate (4) to body as shown. No hardware required, Tailgate should move freely up or down. Pull up on Spring Loaded Hitch Bracket (17) for attachment to vehicle.
- Page 9 Operating Instructions Before Using Dump Cart: Check tire pressure and inflate to 30 psi if needed. Read all Safety Rules found on page 1. How to Use Dump Cart: Attach Dump Cart to your tractor using the supplied hitch pin. Do not exceed 1000 pounds when loading material into the cart body.
-
Page 10: Repair Parts
Repair Parts ITEM PART NO DESCRIPTION QTY ITEM PART NO DESCRIPTION 401011-R2 BODY HALF, RIGHT SPRING LOADED HITCH BRACKET 401021-R2 BODY HALF, LEFT HEX BOLT, 3/8-16 X 3/4" 401031-R2 GATE, FRONT HEX NUT, 3/8-16 C-LOCK 401041-R2 TAILGATE DRAWBAR, WELDED 401051-R2 CORNER CLEVIS, SWIVEL 401071-R2... - Page 11 Proudly designed and tested in Columbus, Ohio Manufactured in the U.S.A. from domestic and imported components MODEL # TB-3048SS (800) 652-2321 (800) 652-2321...