Page 1
NESMU-JUF-001E (V.1.0) Fluorescence Cell History Recorder User Manual NanoEnTek Inc. (HQ) 12F, 5, Digital-ro 26-gil, Guro-gu, Seoul, 08389, Korea Tel. +82-2-6220-7940 Fax. +82-2-6220-7721 NanoEnTek USA Inc. 5627 Stoneridge Drive Suite 304, Pleasanton, CA 94588, USA Tel : +1-925-225-0108, +1-888-988-0108(Toll free)
Product components JuLI™ FL is shipped with the following components. Please check all components listed below when an instrument was delivered. If any item is missing or damaged, contact your local distributor or e-mail sales@nanoentek.com. Scope unit Station unit Power cord...
Installation Live-cell images from various cell culture dishes are directly Installing captured in a cell culture incubator. JuLI™ FL This compact design allows an instrument to be installed in an incubator, and prevents the contamination by maintaining a sterile environment. Also, the intuitive graphic user interface provides quick and convenient use in a cell culture incubator while capturing time-lapse imaging.
Description <Scope unit> Front view Focus knob : is used to adjust the image quality to obtain better cell images. Stage : place sample here. : JULI-FLG04 : Green, Bright : JULI-FLR04 : Red, Bright <Station unit> LCD touch screen : Contains buttons for necessary functions and displays the images.
Page 9
Description <Scope unit> Rear view : is machinery cooling system. <Station unit> Power inlet ™ : connects JuLI FL to an electrical outlet using the supplied power cord and the appropriate plug (based on the electrical outlet configuration in your country). On/off switch : is main power switch.
Page 11
Description Data menu User interface Monitoring movie Data menu Data list Graph Rename button Multi select button Screen Delete Save to Monitoring data information Zoom bar shot button button Settings menu User interface Scope unit Sensitivity Settings menu channel & Background level power Dilution Image...
Operation 1. Press the Power button to start JuLI™ FL. Focusing The main screen will be displayed. Adjust the focus 2. Place the sample on the stage. 3. Check the channel by pressing the Channel tab if the 2 scope is connected. Select the Bright or the Fluorescence mode. 4.
Operation 1. Adjust the focus of JuLI™ FL (Refer to page 14 - 15) Focusing Auto focus 2. After adjusting focus, press the Auto focus button to get more accurate focus without individual variations · The Auto focus is the auto-focusing function which automatically senses the focus optimized for the analysis software of the JuLI™...
Operation 1. Adjust the focus of JuLI™ FL (Refer to page 14-15). Focusing Confluence 2. Press the Confluence button (Bright mode only). (Bright mode only) 3. Value of confluence would be shown. x1 x1 · If the value of confluence should be more accurate, try again after adjusting parameters in the Setting menu (Refer to page 40).
Operation 1. Adjust the focus of JuLI™ FL (Refer to page 14-15). Focusing Bright image 2. Press the Br button and the Capture button to acquire an image. capture x1 x1 · Press the Preview button to recapture if necessary. 3.
Operation 1. Capture the bright image and the fluorescence image Focusing (Refer to page 20-21). Merged image capture 2. Press the Merge button to show the merged color image. x1 x1 3. If necessary, press the Save button to save the merged image.
Page 23
Operation 4. Choose the monitoring mode among the Growth rate, the Monitoring Wound healing and the Movie only. · Movie only means just monitoring cells without calculating the cell confluence value. 5. After choosing channel 1or channel 2, set movie options (Choose both channel 1 and channel 2 in case of dual monitoring.).
Page 25
Operation · Dual scope channel can be checked at once by pressing the Dual view button Monitoring when 2 scope unit is connected to the station unit. To close dual view mode, double click it. (or press the Close button.) ·...
Page 27
Operation 3. Data can be opened or shown by double tapping folder name Data in Data list or pressing the Enter button. Open data 4. The captured image can be shown by tapping its file name. The images can be checked by pressing the Play button. 5.
Operation 1. Connect the USB drive to the station unit. Data · The Save to USB button will be activated by connecting USB drive to the station unit. Save to USB 2. Select the folder or file by tapping it once. 3.
Operation 1. Select folder or file that should be deleted from the instrument. Data Delete · To delete several folders or files at once, select all of them using the Multi select button. 2. Press the Delete button to delete selected folders or files.
Operation • Mix well 10 µL of sample and the 10 µL of 0.4% trypan blue stain Counting (Bright mode). Sample- • Place the Fluorescence sample on the scope unit preparation (Fluorscence mode). 1. Load 10 µL of sample mixture on the counting slide (side A) using a pipette.
Operation 1. Adjust the focus of JuLI™ FL (Refer to page 14-15). Counting If necessary, press the Auto focus to get more accurate focus Bright counting without individual variations. (Stained by trypan blue) 2. Press the Br Counting button for the cell counting. ·...
Operation 1. Adjust the focus of JuLI™ FL (Refer to page 14-15). Counting If necessary, press the Auto focus to get more accurate focus Fluorescence without individual variation. counting 2. Press the FL Counting button for the cell counting. · The Br counting button and the FL counting button are activated in the Bright mode. ·...
Page 39
Operation 5. The counting results including the total cell, fluorescence Counting cell, non-fluorescence cell, average cell size show up on the Fluorescence Fluorescence Gating tap. counting Fluorescence gating tap Graph After Fluorescence gating (Non-Fluorescence cell) After Fluorescence gating (Fluorescence cell) Fluorescence intensity Fluorescence...
Operation Settings menu works for each scope unit if 2 unit is connected to Settings the station unit. Press the Channel tab to select each scope unit. Settings Set the recommended parameter values for corresponding to cell line. The default value is A (Bright mode only). Set up parameter Sensitivity : Refers to the contrast of the objects from the background.
Operation Set the dilution factor corresponding to the experiment condition Setting and the Apply button. Set up dilution factor The JuLI™ FL supports various image formats including JPEG, Setting BMP, TIFF, and PNG. Select one as mostly utilized format. The Set up image default format is JPEG.
Update button. If you have any questions about the software updates, contact sales@nanoentek.com. 2. Visit JuLI™ FL website at www.nanoentek.com to download updated software which will be supplied as a .zip file to your desktop. 3. Unzip the JuLI™ FL Update.zip file and save the software in a USB drive.
Operation Check the disk space of JuLI™ FL. Setting If no disk space left, the saved data should be deleted in Data menu Check the disk (Refer to page 32). space...
Page 47
Operation 4. If you want to change PC software installation folder, press the Installation Browse button and choose the location that you want. 5. After choosing the installation folder, press the Install button to proceed with the installation. 6. The PC activates the “Installation of the Software”...
Operation PC software Home 1. Press the Open button. PC software Open data · Folders and files can be opened by dragging and dropping on data list window directly. 2. Browse the folder and select it.
Page 51
Operation 5. The image can be magnified using the Zoom bar. PC software Open data 6. Select the viewing region by dragging the preview window. 7. Press the Insert scale bar button to activate the scale bar on the preview window, if necessary. •...
Operation 1. Press the Export button. Information of each image in folder PC software can be exported. Export data 2. Select the folder where exported file should be saved.Type the file name for saving exported file. ☞ The file will be saved as csv file, which is compatible with Excel and Notepad programs.
Operation 1. Press the Movie menu. PC software Edit movie file 2. Recorded movie can be shortened easily through the JuLI™ FL PC Software. Set the start point and end point by moving the bar. 3. Check the Apply box to edit the movie. 4.
Page 57
Operation 5. Determine the value for the minimum cell size and the PC software maximum cell size touching the control bar ( ) to adjust Recount bright data minutely. · The set-value will be immediately reflected in the Counting results.
Page 59
Operation 5. The counting results including the total cell, live cell, dead PC software cell, and average cell size show up on the Bright tap. Recount fluorescence data 6. The counting results including the total cell, fluorescence cell, non-fluorescence cell and average cell size show up on the Fluorescence tap.
Operation 1. Dual monitoring data can be checked at once in the Dual PC software view menu. Press the Dual view menu. Dual view 2. Summary of the dual monitoring will be shown. 3. Select the modes (Br or FL) of each channel. ·...
Never disassemble or service JuLI™ FL by yourself. Unauthorized repairs may damage JuLI™ FL or alter its functionality, which will void your warranty. Contact sales@nanoentek.com or your local JuLI™ FL distributor to arrange for service. Always wipe surfaces with ethanol-soaked paper towels.
Page 65
Fail to capture · Check if the scope unit and the station unit are connected properly. Movie does not play on · Install the codec provided JuLI FL USB drive or windows media player. NanoEnTek website. Can not transmit the screen ·...
Warranty NanoEnTek provides 1-year warranty service for defects of material and workmanship. If any defects occur in JuLI™ FL, NanoEnTek provides free repair service for the defective parts at its discretion. The following defects, however, are specifically excluded: Defects caused by improper operation.
Safety precautions Review and follow the safety instructions below : If water or other material enters the instrument, adaptor, or power inlet, disconnect the · power cord and contact a service person. For operating environment, Check product Specifications (Refer to page 70). ·...
Product specifications Environmental conditions Electrical input AC 100 - 240Va.c., 1.9A, 100W Frequency 50 / 60 Hz Installation site Indoor use only Operating 5 - 40 °C temperature Maximum relative 20 - 95 % humidity Instrument Magnification 4 X and digital zoom ( ~ 450 X) Image resolution 1280 x 960 pixels (1.3 M) Exported formats...
Technical support Visit our Website at www.nanoentek.com for : Technical resources, including manuals, FAQs, etc. · Technical support contact information · Additional product information and special offers. · For more information or technical assistance, please call or email. NanoEnTek Inc. (HQ)