Honda CBF125M Manual page 99

Tyre Puncture
u
# #
Rear Wheel
Removal
1. Support your vehicle securely and raise
the rear wheel off the ground using the
centre stand or a hoist.
2. Remove the rear brake adjusting nut,
disconnect the brake rod from the brake
arm by pushing down on the rear brake
pedal.
3. Disconnect the brake stopper arm from
the brake panel by removing the cotter
pin, stopper arm nut, washer and rubber
grommet.
4. Remove the drive chain case.
5. loosen the drive chain lock nuts and drive
chain adjuster nuts on both sides of the
swingarm.
6. Remove the rear axle nut while holding
the rear axle shaft at the other end with a
wrench.
96
Removing Wheels
P. 54
2
Drive chain
case
Drive chain
Rear axle nut Brake rod
lock nut
Brake
Brake Stopper
arm arm nut
adjusting
nut
7. Remove the drive chain from the driven
sprocket by pushing the rear wheel
forward.
8. Remove the rear axle shaft, rear wheel
and side collars from the swingarm.
Drive chain
adjusting nut
Cotter
Brake
pin
stopper
arm