Honda CBF125M Manual page 83

Drive Chain Checking the Drive Chain Slider
►
# #
Checking the Drive Chain Wear
Check the chain wear label when adjusting the
drive chain. If the index mark of the adjusting
plate enters the red zone on the label after the
chain has been adjusted to the proper slack,
the chain is excessively worn and must be
replaced.
Drive chain must be replaced with new
sprocket set.
Chain: DID420 ADV
LGBR420OR
If necessary have the drive chain replaced by
your dealer.
Chain wear label
Adjusting plate
80
Checking the Drive Chain
Slider
Check the condition of the drive chain slider.
The drive chain slider will need to be replaced if
the chain slider is worn to the wear limit
indicator.
If necessary have the drive chain slider replaced
by your dealer.
Red zone
Wear limit
indicator
Index mark
Drive chain slider