Advertisement
T9600HRT and T9600HRT Comfort v5.6, v.5.9
Calibration Guide
MANUAL CALIBRATIONS
STEP 1
ENTER ENGINEERING MODE
• With the SAFETY KEY in place, hold the
buttons for 5 seconds. The profile window will read " " D D G G A A 3 3 J J " " and
DOWN"
the function window will read " " N N O O N N E E " " .
• You are now in ENGINEERING MODE.
STEP 2
CHECKING CONFIGURATION
• Press the
"ELEVATION UP"
window. Press
"SELECT"
" " 5 5 . . 6 6 " " or " " 5 5 . . 9 9 " " will appear in the elevation window and " " 1 1 0 0 " " will appear in
the speed window.
• To change configurations, press the
• Press the
button to update data.
"SELECT"
STEP 3
SET MINIMUM SPEED
• Press the
"ELEVATION DOWN"
" " P P 0 0 " " . " " 0 0 " " will appear in the elevation window and " " 2 2 9 9 " " should appear in
the speed window. To adjust, press
• Press the
"SPEED UP"
window reads " " 2 2 6 6 - - 3 3 3 3 " " . The running belt should be moving at .5 MPH.
• Press the
button to update the data.
"SELECT"
STEP 4
SET MAXIMUM SPEED
• Press the
"ELEVATION UP"
" " 0 0 " " will appear in the elevation window and " " 3 3 2 2 5 5 " " should appear in the
speed window. To adjust, press
• Press the
"SPEED UP"
window reads " " 3 3 2 2 0 0 - - 3 3 3 3 0 0 " " . The running belt should be moving at 12 MPH.
• Press the
button to update the data.
"SELECT"
STEP 5
SET THE HALF MAXIMUM SPEED
• Press the
"ELEVATION UP"
" " 0 0 " " will appear in the elevation window and " " 1 1 6 6 9 9 " " should appear in the
speed window. To adjust, press
• Press the
or
"SPEED UP"
" " 1 1 6 6 3 3 - - 1 1 7 7 5 5 " " . The running belt should be moving at 6 MPH.
• Press the
button to update the data.
"SELECT"
TREADMILL.CALIB.REV4
continued
"ELEVATION UP"
button until " " E E N N G G 1 1 " " appears in the function
. The function window will read " " 2 2 4 4 0 0 C C " " or " " I I C C 0 0 0 0 " " .
or
"SPEED UP"
"SPEED DOWN"
button until the function window reads
.
"START"
or
button until the elevation
"SPEED DOWN"
button until the function window reads " " P P 1 1 " " .
.
"START"
or
button until the elevation
"SPEED DOWN"
button until the function window reads " " P P 2 2 " " .
.
"START"
buttons until the console reads
"SPEED DOWN"
2
and
"SPEED
button.
ILLUSTRATIONS FOR DISPLAY PURPOSES ONLY
Date of last revision: 12.05
Advertisement
