Advertisement
• Measurement Area Calibration/Measurement Area Settings
Configure the temperature measurement area and the correction parame-
ters.
A D D I N G FAC E I N F O R M AT I O N
1. Hold the screen surface and verify the identity to enter the main page.
2. Enter the User Management page, tap + to enter the Add User page.
3. Set the user parameters according to actual needs.
4. Tap Face and collect the face information according to the instructions.
You can view the captured picture at the upper right corner of the page.
Make sure the face picture is in good quality and size. For details about
the tips and positions when collecting or comparing the face picture, see
the contents on the right.
5. If the picture is in good condition, tap Save to save the picture. Or tap Try
Again to take another face picture.
6. Tap
to save the settings. Go back to the initial page to start authenti-
cation. For other authentication methods, see the device user manual.
Use other authentication methods if the device is affected by the light or
other items.
NOTE
Biometric recognition products are not 100% applicable to anti-spoof-
ing environments. If you require a higher security level, use multiple
authentication modes.
TIPS WHEN COLLECTING/
COMPARING FACE PICTURE
Expression
• Keep your expression naturally when collecting or com-
paring face pictures, just like the expression in the picture
on the right.
• Do not wear hat, sunglasses, or other accessories that
can affect the facial recognition function.
• Do not make your hair cover your eyes, ears, etc. and
heavy makeup is not allowed.
POSTURE
In order to get a good quality and accurate face picture, position your face
looking at the camera when collecting or comparing face pictures.
Correct
Tilt
Side
Raise
Bow
9
Advertisement
