Table of Contents
Advertisement
Solving Image or Sound Problems
• Select the correct audio input port.
Signal I/O > Audio Output
s
Signal I/O > HDMI Audio Output
s
• If you want to output audio from a connected audio source when the
projector is in standby mode, select these settings in the projector's menus:
• Turn off Quick Startup in the Operation menu.
• Set the A/V Output setting to Always On in the Signal I/O menu.
• Select the correct audio output in the Audio Out Device setting.
Signal I/O > HDMI Link > Audio Out Device
s
• If you do not hear sound from an HDMI source, set the connected device to
PCM output.
• When you are connecting the projector to a Mac using an HDMI cable,
make sure your Mac supports audio through the HDMI port. If not, you
need to connect an audio cable.
• If the volume for the computer is set to the minimum while the projector is
set to the maximum, the noise may be mixed. Turn up the computer's
volume and turn down the projector's volume. (When you use Epson
iProjection (Windows/Mac) or USB Display.)
g g Related Links
• "Projector Connections"
p.31
• "Input Signal Settings - Signal I/O Menu"
• "Controlling the Volume with the Volume Buttons"
Solutions to Microphone Problems
If there is no sound when you use a microphone connected to the projector,
try the following solutions:
• Make sure the microphone is securely connected to the projector.
• Check the Mic Input Level setting in the projector's Signal I/O menu. If the
setting is too high, the sound of other connected devices will be too low.
g g Related Links
• "Input Signal Settings - Signal I/O Menu"
p.207
p.86
p.207
• "Connecting a Microphone"
p.41
Solutions When Image File Names are not Displayed
Correctly in PC Free
If any file names are longer than the display area or include unsupported
symbols, the file names are shortened or changed in PC Free. Shorten or
change the file name.
260
Advertisement
Table of Contents
