2.3
List of Jumpers
Please refer to the table below for all of the system's jumpers that you can configure
for your application.
Label
JP1
JP5
JP6
JP8
JP9
2.3.1
Auto Power Button Enable/Disable Selection (JP1)
Disabled
Note: If Auto-Power Button (JP1) is set to Disabled (1-2), need to use power button (JP1)
(1-2) to power on system.
2.3.2
Clear CMOS Jumper (JP6)
Normal (Default)
Chapter 2 – Hardware Information
Function
Auto Power Button Enable/Disable Selection
COM1 pin 9 function select
Clear CMOS Jumper
PEG Lanes CFG6 selection
PEG Lanes CFG5 selection
1 2 3
Enabled (Default)
Clear CMOS
12