Page 1
Assembly and Operation Guide CANTILEVER ROLLING BASE BASE-13R Rolling Base...
Page 2
Thank you for purchasing Treasure Garden’s Cantilever Rolling Base. Please remove all contents from the package, inspect and review checklist. CHECKLIST A - (1) Base Lid B - (1) Steel Base Frame with Wheels C - (4) Add-on Weight Containers D - (1) Pedal E - 230 lbs.
Page 3
ASSEMBLE BASE STEP • Select area to assemble base. • Using a two-person team, lift base from carton and place base in desired location (Fig. 1). CAUTION: Avoid fingers getting caught under base! • Press the spring loaded lock located under foot pedal to remove pedal and set aside (Fig.
Page 4
• Remove rotating hub (sold separately) from the main frame of umbrella by removing the (2) bolts and (2) washers (Fig. 5) from lower backside of umbrella. Set aside bolts and washers for later use. • Place rotating hub onto base frame and secure with supplied (5) hub bolts and (5) washers included with umbrella (Fig.
Page 5
• Place each add-on weight container back into base frame sections (Fig. 12). Note: • Add-on weight containers only fit one direction. (Fig. 12) • Carefully place base lid onto base frame (Fig. 13). • Reattach foot pedal (Fig. 14). •...
Page 6
OPERATING ROLLING BASE STEP • To move your base/umbrella to a new desired location, firmly step down on the base foot pedal to unlock base wheels (Fig. 15). • Roll base to new location (Fig. 16). • Firmly step down on foot pedal again to lock wheels and position in place (Fig. 15). (Fig.
Page 7
This is important to prevent injury or material damage. WARRANTY: In the event that warranted factory service is required, Treasure Garden will assume Treasure Garden warrants this product the responsibility of the return freight (for residential use ONLY) to be free charges for the first year only.
Need help?
Do you have a question about the BASE-13R and is the answer not in the manual?
Questions and answers