Channel Menu - HANNspree XV-S Series Manual

Treble: To adjust the treble (It is active in TV/ SCART1/ SCART2/ SCART2-SV. However, in other
input sources, it is only active when sound mode is in "User" condition).
Balance: To adjust left and right audio balance.
Reset: Press ENTER

Channel Menu

—To setup for TV
It is only active in TV source.
Auto Scan: To automatically preset the channels into TVs memory by pressing ◄►. Kindly
suggest you auto scan all the channels before watching your TV for the first time.
Note: After auto scan all the channels, you need not to do it again when turning on your TV next
time.
Manual Store: The function is to give a minute search for possible existing hem in memory.
1. Press ◄ or ► to get into "Manual Store."
2. Move the cursor to "Prog. No, " and select the desired channel position with ◄►.
3. Move the cursor to "System," and select the system according to your local area with◄►.
4. Move your cursor to "Search," and search the detectable channels with ◄►.
5. Move your cursor to "Fine Tune," and adjust the picture with ◄►.
6. Move to Store, then Store the instruction with ENTER
Note: The channel will be stored instead of the former program.
to reset all the settings in Sound page.
.
16