HIKVISION DS-HD1 Quick Start Manual page 8

5
Connect the wire harness to the chime's terminals Connect the wire harness to the chime's terminals
named TRANS and FRONT. named TRANS and FRONT.
REAR TRANS FRONT
DO NOT OIL
7
Mount the power kit to the side of the chime. Mount the power kit to the side of the chime.
6
Insert the existing chime wire and the other end of Insert the existing chime wire and the other end of
the wire harness into the wire connector, and twist it the wire harness into the wire connector, and twist it
tightly. Repeat this step with the other chime wire. tightly. Repeat this step with the other chime wire.
Wiring Overview
Chime Wire
Chime Wire
8
Replace the chime cover.
3
Wire
Connector
Chime Wire
Wire Harness