HIKVISION DS-HD1 Quick Start Manual page 14

Connecting the Doorbell to an NVR
The DS-HD1 Doorbell can be connected to a Hikvision NVR for viewing and recording.
1. Open the NVR interface (i.e., Web, local, or iVMS-4200 client). 1. Open the NVR interface (i.e., Web, local, or iVMS-4200 client).
2. Go to Camera Management 2. Go to Camera Management. .
NOTE:
The Camera Management interface location varies by NVR model.
3. Click the Custom Add tab on the title bar to enter the Add IP Camera (Custom) interface. 3. Click the Custom Add tab on the title bar to enter the Add IP Camera (Custom) interface.
4. Enter the following information (use the Hikvision SADP tool (available at www.hikvision.com) to find doorbell's IP address): ): 4. Enter the following information (
· IP Camera Address: [doorbell's IP address]
· Protocol: HIKVISION
· Management Port: 8000
· Transfer Protocol: TCP
· User Name: admin
· Password: [verification code on doorbell label]
5. Click Add to finish adding the doorbell. 5. Click Add to finish adding the doorbell.
Add IP Camera (Custom)
IP Camera Address
110.110.1.11
Protocol HIKVISION
Management Port
8000
Transfer Protocol
TCP
User Name
admin
Password
********
Continue to Add
9
Add