HIKVISION DS-HD1 Quick Start Manual page 10

5
Affix the mounting plate to the wall. Affix the mounting plate to the wall.
Mounting Screw
7
If you have a chime installed, follow
Option A Connect doorbell to your existing doorbell wires.
Option B Connect the fuse wire to your existing doorbell wire. Connect the fuse wire to your existing doorbell wire.
Fixing Screw
Option A; if not, follow
Fixing Screw
6
Remove faceplate on your doorbell from bottom to top.
Option B.
U-Shaped Wire
Fuse Wire
Power Supply: 16 to 24 VAC
5