Download Print this page
Clas Ohlson HL-205 Instruction Manual
Clas Ohlson HL-205 Instruction Manual

Clas Ohlson HL-205 Instruction Manual

Network tester

Advertisement

Available languages

Available languages

Quick Links

Network Tester
Article number: 38-2752 Model: HL-205
Please read the entire instruction manual before using and save it for future reference.
We apologise for any text or photo errors and any changes of technical data.
If you have any questions concerning technical problems please contact our Customer
Service Department (see address on footnote.)
Description
Detachable "Remote" unit for measuring at both ends of the cable.
Indicates whether the cable is complete, broken or short-circuited.
Indicates whether the cable is straight or crossed.
Requires no special battery, operates on a 9 V alkaline battery.
Connections for both TP cable (RJ45) and ISDN cable (RJ11).
Inspecting TP cable (RJ45) and ISDN cable (RJ11)
Warning: Never connect the network tester to a network which is in use and is active;
release the cables before testing them.
1. Connect one end of the cable to the relevant port on the Master Unit and the other
end to the Remote Unit, (detach the detachable Remote and connect it to the other
end of the cable if the cable is already installed)
2. Turn the on/off switch to ON (or S for slow testing)
3. Read the LEDs on the Master Unit.
4. The LEDs (1-8 and G) flash in pairs at the same time on both of the network tester's
units.
If the cable is OK the Master and Remote flash in unison: 1 - 1, 2 - 2, 3 - 3 etc.
If the cable is faulty, none of the LEDs next to that number will light if it is just
that number wire in the cable that is faulty, if the next wire in the cable is whole
the LEDs will flash next to that number on the Master.
If G flashes during testing, the cable is shielded.
If the connected cable is crossed, Master and Remote will start flashing out of
sync: 1 - 3, 2 - 4, 3 - 1 etc.
Note!
ISDN cable (RJ11) has 6 wire cores (1 – 6).
TP cable (RJ45) has 8 cores (unshielded cable) or 8 cores + shield (G).
The on/off switch has 3 positions: OFF, ON and S (slow testing).
GREAT BRITAIN For consumer contact, please visit www.clasohlson.
co.uk and click on customer service. Internet: www.clasohlson.co.uk
ENGLISH

Advertisement

loading

Summary of Contents for Clas Ohlson HL-205

  • Page 1 ENGLISH Network Tester Article number: 38-2752 Model: HL-205 Please read the entire instruction manual before using and save it for future reference. We apologise for any text or photo errors and any changes of technical data. If you have any questions concerning technical problems please contact our Customer Service Department (see address on footnote.)
  • Page 2 SVENSKA Nätverkstestare Artikelnummer: 38-2752 Modell: HL-205 Läs igenom hela bruksanvisningen före användning och spara den sedan för framtida bruk. Vi reserverar oss för ev. text- och bildfel samt ändringar av tekniska data. Vid tekniska problem eller andra frågor, kontakta vår kundtjänst (se adressuppgifter längst ner på...
  • Page 3 NORSK Nettverkstester Artikkelnummer: 38-2752 Modell: HL-205 Les bruksanvisningen grundig og ta vare på den til senere bruk. Vi reserverer oss mot ev. tekst- og bildefeil, samt forandringer av tekniske data. Ved tekniske problemer eller andre spørsmål, ta kontakt med vårt kundesenter (se opp- lysninger nederst på...
  • Page 4 SUOMI Verkkotesteri Tuotenumero: 38-2752 Malli: HL-205 Lue käyttöohjeet ennen tuotteen käyttöönottoa. Säilytä käyttöohjeet tulevaa tarvetta varten. Pidätämme oikeuden teknisten tietojen muutoksiin. Emme vastaa mahdollisista teksti- tai kuvavirheistä. Jos laitteeseen tulee teknisiä ongelmia, ota yhteys myymälään tai asiakaspalveluun (yhteystiedot tämän sivun lopussa).

This manual is also suitable for:

38-2752