Table of Contents
Advertisement
Quick Links
Quick Reference Guide
Connecting Argox AR-3201 with
your smart devices
AR-3201 is able to connect to an iOS or Android device that you
can use to process barcodes.
Connecting to an iOS device
You can connect your scanner to an iOS device, such as iPhone,
iPad or iPod touch. The setup screen may vary depending on your
device. In this section, an iPhone is taken for example.
1. Scan the "iOS HID" barcode.
2. On your iPhone, Go to Settings >
Bluetooth. Turn on Bluetooth, and
your iPhone searches other Blue-
tooth devices automatically. If it
detects your scanner, it shows
"AR3201:XXXXXXXXX" (X is your
scanner's serial number) under
DEVICES. Tap your scanner to
connect it.
3. When it connects successfully, the
status of your scanner is changed to
Connected.
Note: Apple iOS devices will allow only one
input device working at the same time. So
when you connect an Argox Cordless Scanner
with your Apple device, the Apple Virtual
Keyboard will be invalid automatically. To have
the Apple Virtual Keyboard be available again,
you need to scan the barcode below.
th
Revision V2 Mar 26
, 2020
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SATO Argox AR-3201
Summary of Contents for SATO Argox AR-3201
- Page 1 Quick Reference Guide “AR3201:XXXXXXXXX” (X is your scanner’s serial number) under Connecting Argox AR-3201 with DEVICES. Tap your scanner to your smart devices connect it. AR-3201 is able to connect to an iOS or Android device that you can use to process barcodes.
- Page 2 Connecting to an Android Re-connection 3. Tap Scan to search Bluetooth devices. If it detects your scanner, it device From this section, you are instructed to shows “AR3201:XXXXXXXXX” (X is your disconnect with the smart device and You can connect your scanner to an scanner’s serial number) in the list.
Need help?
Do you have a question about the Argox AR-3201 and is the answer not in the manual?
Questions and answers