HPFI Nexstep 759 Assembly Instructions

hp .com
Nexstep Model 759
Nexstep Model 759
SEAT
BACK
1. This chair was designed to seat and support only 1 person.
1. This chair was designed to seat and support only 1 person.
2. All bolts, screws and knobs must be securely tightened prior to use.
2. All bolts, screws and knobs must be securely tightened prior to use.
3. Check that all bolts, screws and knobs are tight every 3 months or as needed.
3. Check that all bolts, screws and knobs are tight every 3 months or as needed.
4. Take care not to overtighten the back tilt knob when increasing or decreasing tilt tension.
4. Take care not to overtighten the back tilt knob when increasing or decreasing tilt tension.
5. Responsibly dispose of packing materials. The plastic covering should not be used as a toy or a head
5. Responsibly dispose of packing materials. The plastic covering should not be used as a toy or a head covering as
covering as suffocation may result.
suffocation may result.
6. Only use this chair for its intended purpose. Do not use as a step ladder.
6. Only use this chair for its intended purpose. Do not use as a step ladder.
7. Use a mild detergent for cleaning.
7. Use a mild detergent for cleaning.
If you have any difficulty with this installation/assembly, please contact our Customer Service department at
1-800-447-3462, ext. 2120.
High Point Furniture Industries
©HPFi 1104 Bedford Street

Parts List

Parts List
SLED BASE
HARDWARE
Arm Screw:
Allen Wrench:
PO Box 2063 High Point, NC 27261-2063
High Point, NC 27263
High Point Furniture Industries
ARMS (2)
Back Screw:
Large Washer:
Goes Great with Work.
P 800-447-3462
www.hpfi.com (p) 800.447.3462
Sled Base Screw:
Small Washer:
F 800-231-6784
www.hpfi.com
(f) 800.231.6784