HPFI Nexstep 752 Assembly Instructions

(3)
(1)
CARE & CLEANING:
1. This chair was designed to seat and support only 1 person.
2. All bolts, screws and knobs must be securely tightened prior to use.
3. Check that all bolts, screws and knobs are tight every 3 months or as needed.
4. Take care not to overtighten the back tilt knob when increasing or decreasing tilt tension.
5. Responsibly dispose of packing materials. The plastic covering should not be used as a toy or a head
covering as suffocation may result.
6. Only use this chair for its intended purpose. Do not use as a step ladder.
7. Use a mild detergent for cleaning.
©HPFi 1104 Bedford Street

FEATURES:

• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise the seat height, remove pressure from seat and pull
up on Lever (1). To lower seat height, sit in the chair and
pull up on Lever (1).
• SYNCHRO TILT
To lock, return chair to the upright position and push Lever
(1) in. To unlock, pull Lever (1) out.
• TILT ADJUSTMENT
For optimum comfort, this chair is equipped with an
adjustment that will allow you to change the tension of the
tilting feature. Turn the Knob (2) clockwise to increase
tension. Turn the Knob (2) counter-clockwise to decrease
(2)
(ease) the tension.
NOTE:
adjustment Knob (2).
• ARM HEIGHT ADJUSTMENT
To adjust the height of the Arms (3), push the button on the
side of the Arms (3) in. Release the buttons to lock the
Arms (3) at the desired height.
High Point, NC 27263 www.hpfi.com
Nexstep Model 752
Be careful to not completely loosen the back tilt
(p) 800.447.3462 (f) 800.231.6784