General safety precautions WARNING! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following. Read all these instructions before operating this product and save these instructions. For safe operations: 1.
Page 4
22. Have your tool repaired by a qualified person. This electric tool is in accordance with the relevant safety requirements. Repairs should only be carried out by qualified persons using original ZENIT TM spare parts. Otherwise this may result in considerable danger to the user.
1. Rubber protective socket cap (dustcoat); 2. SDS-plus socket for removable tool fixation; 3. Clamp of the depth gauge; 4. Front handle; 5. Side mode switch ( 6. Service cover for the mechanism lubrication; 7. Back mode switch ( 8. «On/Off» switch. technical specifications Model RH-1600/2 profi...
applications Rotation and hammering function • Drilling anchor holes • Drilling holes in concrete • Drilling holes in tile Rotation only function • Drilling in steel or wood • Tightening screws Hammering only • Wall chasing • Crushing and chiseling prior to operation 1.
you shift the change lever to the correct position. How to use ATTENTION To prevent accidents, make sure to turn the switch off and disconnect the plug from the receptacle when the drill pits and other various parts are installed or removed. The power switch should also be turned off during a work break and after work.
Page 8
Inobservance of these rules will make warranty void! WARNING! Repair, modification and check of ZENIT power tools should be performed only in authorized service centers ZENIT. While use or maintenance of power tools follow all safety rules and standards. NOTE Zenit Power Tools are constantly being improved and modified to incorporate the latest technological advancements.