Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Zenit RH-1300
Summary of Contents for Zenit RH-1300
- Page 1 InstructIon manual...
-
Page 3: General Safety Precautions
General safety precautions WarninG! When using electric tools, basic safety precautions should always be followed to reduce the risk of fire, electric shock and personal injury, including the following. read all these instructions before operating this product and save these instructions. for safe operations: 1. - Page 4 22. Have your tool repaired by a qualified person. This electric tool is in accordance with the relevant safety requirements. Repairs should only be carried out by qualified persons using original Zenit tM spare parts. otherwise this may result in considerable danger to the user.
-
Page 5: Technical Specifications
SpecificationS model rh-1300 rated power 1300 W rated voltage 220-240 V rated frequency 50-60 Hz Max drilling diameter wood 40 mm steel 13 mm concrete 26 mm no load speed 1100 rpm impact rate 4200 spm impact energy 3,5 J... -
Page 6: How To Use
When the work area is removed from the power source. use an extension cord of sufficient thickness and rated capacity. The extension cord should be kept as short as practicable. 4. replacing the bit. Insert the bit into the chuck and fix it with the wrench or turn the upper part of the keyless chuck. - Page 7 When the drill bit touches an iron reinforcing rod, the bit will stop immediately and the rotary hammer will react to revolve. therefore please grip the side handle and handle tightly as shown in fig. 8. 3. rotation only this rotary hammer can be set to rotation only mode by pressing the push button and turning the change lever to mark.
- Page 8 Keep the brushes clean and ensure that brushes move freely within the brush holders. WarninG Repair, modification and check of ZENIT power tools should be performed only in authorized service centers Zenit. While use or maintenance of power tools follow all safety rules and standards.
- Page 12 Demix LLC Head office: 14, Shevchenko str., 3rd floor Dnepropetrovsk, Ukraine, 49044 tel./fax: +38 056 375-43-16 http://www.en.zenit-profi.com...