Baby Brezza Formula Pro Advanced WiFi Instructions For Set-Up, Use And Cleaning page 7

Easy Daily Cleaning Instructions
It is EXTREMELY IMPORTANT to clean the funnel after every 4 bottles made.
This will keep your Formula Pro® Advanced WiFi dispensing accurately.
Always make sure Funnel & Funnel cover are COMPLETELY DRY before re-assembling.
1
Remove Funnel & Funnel Cover by pulling
out and down.
IMPORTANT
3
Wipe the powder-dispensing hole on the
underside of the powder container using a
dry paper towel or soft dry cloth.
PLEASE NOTE: You don't need to remove the powder container or the powder container parts for daily cleaning.
2
Wash Funnel & Funnel Cover with warm,
soapy water & rinse well.
Dry completely before re-installing.
Suggestion to make cleaning easier
To make daily cleaning even easier, you can
purchase an extra funnel & funnel cover on
BabyBrezza.com Then you can swap the
spare funnel with the funnel that needs
to be cleaned. NOTE: you will still need to
wipe the powder dispensing hole as shown in Step 3
11
Monthly Cleaning Instructions
Once a month, give your Formula Pro® Advanced WiFi a thorough cleaning.
Please watch set-up and cleaning videos at babybrezza.com/video.
1
Hand-wash all parts shown above with warm
soapy water, rinse well and dry thoroughly.
Monthly Descaling Instructions
You can leave the formula powder in the powder tank during the descaling process.
To prevent mineral scale on the water heater inside your Formula Pro® Advanced WiFi, follow these easy steps:
1. Remove the water tank, empty it and ll it with 20oz distilled vinegar & 20oz of puri ed water.
2. Place the water tank on the base of the machine & place a cup larger than 10oz under the funnel.
3. Select "10oz" with the "ounce" button, then press the
4. Empty the cup, place back under the funnel, then press the "water only" button again to dispense another 10oz.
5. Now unplug the machine, remove the water tank, and empty it. Let the machine sit for 4 hours.
6. Wash, rinse and ll the water tank to the max line with puri ed water, then place it back on the base.
7. Plug in the machine, place a cup to catch 10oz water and use the "water only" button to run an 10oz cycle.
Dispose of the water dispensed in the cup and then repeat this step to run the entire tank of puri ed water
through the machine. When the "Low Water" indicator turns on, you're done rinsing.
8. Re ll the water tank with puri ed water and return to normal use.
2
Hand wash water tank with warm soapy
water, rinse well and dry thoroughly.
only" button to dispense.
"water
12