Baby Brezza Formula Pro Advanced WiFi Instructions For Set-Up, Use And Cleaning page 6

Using the Formula Pro®Advanced WiFi control panel
1
Press the "powder setting" button repeatedly
to select your setting 1 - 10.
It is essential that you choose the correct
setting for your formula brand and type.
Use the app or go to babybrezza.com/FPA
to nd the correct setting for your formula.
3
Press the "temp" button to select temperature.
= Slightly warmer than body temperature
= Body temperature
= Room temperature
The temperature indicator will ash when
heating and will stay solid when the set
temperature is reached.
2
Press the "ounce" button repeatedly to select
the ounces of water you want to dispense.
Ounce size indicates water volume only.
It does not include the volume of powder
added when mixing.
4
Press the "start" button to dispense formula.
The formula pro will remember the setting
& ounce size even if it is unplugged or
turned o .
You do not need to select a powder setting
every time you make a bottle.
You can always change the ounce size or
powder setting by pressing the buttons again.
9
5
The Formula Pro® Advanced WiFi will dispense
powder & water together, then stop
automatically when dispensing is complete.
Some clumping may occur with hypoallergenic
formula and specialty formula powders that are
inherently di cult to mix with water.
7
Check for clumps and shake or stir the bottle
if necessary. Check temperature and feed
your baby.
Check the level
of mixed formula.
6
PLEASE NOTE: The level will appear higher
than the ounce size selected because of added
powder volume and/or variance in
bottle markings.
Example: 4 ounces of water plus powder volume
is approximately 4.5-4.75 ounces depending on
your formula powder type.
IMPORTANT
Re ll the powder when the arms of the
stirring wheel become visible. This is very
important for accurate formula measuring.
10