Baby Brezza One Step Instructions

Mixing Formula
ALWAYS follow the formula manufacturer's instructions for mixing formula and water.
Add water Add Formula Powder
1 2
Use the markings on the Always follow formula
side of the pitcher to manufacturer's powder
measure your desired to water mixing ratio.
amount.
4
Place Lid on Pitcher
3
press the Power Button
Push once to turn on, allow to
mix for 1 minute, then press
again to turn off.*
*Some formula powders, especially hypoallergenic varieties that are inherently difficult to mix, may clump.
Warm water may help dissolve these powders. Make sure prongs on wand are completely submerged
3
for best mixing.
Tip: for powders that float
If your formula powder floats on
top of the water, use the wand
to push it down for better mixing.
Pour mixed formula
into bottles & store
them in the
refrigerator
Tip for mixing smaller amounts of formula:
Press the power button lightly & repeatedly to pulse mix.
This is especially helpful to minimize bubbles when the level
of formula is less than 16oz/410ml in the pitcher.
Instructions
ALWAYS use boiled, cooled water or bottled water suitable for infant formula preparation.
©2018 Baby Brezza Enterprises LLC - 1 East 33rd Street, New York, NY 10016