Page 1
WE-EF LEUCHTEN Installation and Maintenance Instructions Wall Luminaire Surface Mounted DLO239 LED DLG239 LED DLS239 LED DLB239 LED Surge Protection This product features built-in surge protection circuitry in compliance with applicable standards. For comprehensive protection of a luminaire installation against lightning and...
Light Source Maintenance Apart from cleaning the product’s exterior surfaces, no special maintenance work is required. Do not use high- pressure cleaners. In case of component failure due to abnormal circumstances or at end of life, replacement must be carried out Warning: Do not open luminaire while mains supply is switched on.
Installation Installation Procedure The product must be installed and maintained by a 1) Switch off the mains electrical supply. 2) Remove cover A by releasing screws B. building/construction and/or electrical regulations and 3) Check that rating shown on luminaire label relevant legislation.
Page 5
Individual connection Through wiring Fig. I...