Table of Contents
Advertisement
Available languages
Available languages
3.4
1. Switch the device off and remove the mains plug from the socket.
After
2. Remove the vent outlet
use
maining water. Rinse out the tank with fresh water.
3. Dry the water tank and the vent outlet if necessary with a soft, absor-
bent cloth.
4. If you do not intend to use the appliance for a prolonged period: Also pour
away any remaining water in the base
CAUTION! Water must not get into the air vent
soft, absorbent cloth to remove any moisture left inside.
3.5
•
Unusual smell:
Faults
Polluted or stagnant water, clean the tank and fill up with fresh water.
and
•
Unusual noise:
Fault
Insufficient water in the tank, fill up with water/device is not on a solid
reme-
surface, place on a stable and level surface.
dying
If a fault cannot be remedied using the described method, please contact
your service centre.
4 Miscellaneous
4.1
•
During everyday use it is advisable to give the device a thorough
Clean-
cleaning at least every three days. After prolonged non-use, empty
ing and
the device and the tank to prevent contamination / algae from the
mainte-
outset. From time to time disinfect with alcohol. Also clean the device
nance
before and after long storage periods.
•
Before cleaning the device, make sure that it is turned off and the
mains plug is removed from the socket.
•
Remove the water tank
•
Clean the outside of the unit with a soft, damp cloth.
•
Please do not use any aggressive substances for cleaning, such as
scouring cream or other detergents, as these may damage the sur-
faces and reduce the atomisation effect.
•
You can rinse out the water tank with hot water (>65 °C) or an alcohol
of at least 75 % vol. The atomiser chamber with the ultrasonic trans-
ducer
bud. Take care to ensure that no water gets inside the humidifier.
•
The ultrasonic transducer
device. It is important for it to be kept clean and handled with care.
Use e.g. a cleaning brush to remove all the residue and dirt particles.
Never clean the ultrasound generator using metal objects.
4
should be cleaned using an alcoholsoaked cloth and cotton
u
3 Operating / 4 Miscellaneous
and the watertank
1
by tipping it over a wash basin.
6
from the device and empty it.
is the most sensitive component in the
u
. Pour out any re-
4
! You can use a
z
GB
21
Advertisement
Table of Contents
