THIS NOTE IS COMMON FOR PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS.
(In addition to this, the necessary note is printed in each block.)
For Schematic Diagrams.
Note:
• All capacitors are in µF unless otherwise noted. (p: pF).
50 WV or less are not indicated except for electrolytics and
tantalums.
• All resistors are in Ω and
1
/
W or less unless otherwise
4
specified.
•
f
: internal component.
• C : panel designation.
Note: The components identified by mark 0 or dotted
line with mark 0 are critical for safety.
Replace only with part number specified.
• A : B+ Line.
• B : B– Line.
• H : adjustment for repair.
• Voltages and waveforms are dc with respect to ground un-
der no-signal (detuned) conditions.
no mark: CD STOP
• Voltages are taken with a VOM (Input impedance 10 MΩ).
Voltage variations may be noted due to normal production
tolerances.
• Waveforms are taken with a oscilloscope.
Voltage variations may be noted due to normal production
tolerances.
• Circled numbers refer to waveforms.
• Signal path.
F
: TUNER
J
: CD PLAY
E
: TAPE PLAY
j
: TAPE REC
f
: AUX IN
• Abbreviation
AUS
: Australian model
AR
: Argentine model
E51
: Chilean and peruvian models
KR
: Korea model
MX
: Mexican model
MY
: Malaysia model
RU
: Russian model
SP
: Singapore model
CX-LDB10/LDB20
SECTION 7
DIAGRAMS
For Printed Wiring Boards.
Note:
• X : parts extracted from the component side.
• Y : parts extracted from the conductor side.
•
W : indicates side identified with part number.
f
•
: internal component.
•
: Pattern from the side which enables seeing.
(The other layers' patterns are not indicated.)
Caution:
Pattern face side : Parts on the pattern face side seen from
(Conductor side) the pattern face are indicated.
Parts face side
: Parts on the parts face side seen from
(Component side) the parts face are indicated.
• Indication of transistor.
C
Q
These are omitted.
B
E
Q
B
C
E
These are omitted.
• Circuit Boards Location
CONTROL board
HEADPHONE board
15
15
CX-LDB10/LDB20
MAIN board
CD board
POWER (1) board
TUNER unit
POWER (2) board
AUX board