Operating Information - Hagie UpFront DTS 8T Operator's Manual

IV. OPERATING INFORMATION
A. CAB
Steering Column
FIG 18-1
TURN SIGNALS–
To activate the front turn signals (fig. 18-4,
item 1) and the rear turning signals (figure 18-4, item 2), move
the turn signal lever (figure 18-1) right during a right-hand turn
and left during a left-hand turn. Steering column mounted turn
signal indicators will correspondingly flash when either side of
the turn signal is activated. The turn signal lever is not self-
centering; you must return it to the OFF position after complet-
ing your turn.
FIG 18-5
LOWER STEERING COLUMN TILT–
ing column tilts out of the driver's way. To operate the column base tilt, locate
the foot pedal at the base of the steering column (fig. 18-3) and press down to
release the column base lock. Pull or push the column to the desired position
and release the foot pedal to re-lock the column base (fig. 18-6)
FIG 18-2
UPPER STEERING COLUMN TILT–
tilt lock lever on the right-hand side of the steering column (fig. 18-2); rotate
the lever counterclockwise to release the steering column tilt lock. Move the
steering column to desired position and rotate the lever clockwise to lock
column in place (fig. 18-5)
To ease exit and entry, entire steer-
18
1. Turn Signals
2. Upper Steering Column Tilt
3. Lower Steering Column Tilt
FIG 18-3
FIG 18-4
1
To adjust the upper tilt, locate the
2
FIG 18-6