Viking VCFB304 Installation Manual page 45

9
Plug in power cord to verify operation.
Note: Make sure power switch and showroom switch
are in the "On" Position.
10b
Carefully move unit until semi flush with cabinet
(depending on unit).
12
Flush water line by running two quarts of water
into a bucket. Turn water off
10a
Place unit within 3" of being flush with cabinets.
Note: To avoid cabinet damage, place cardboard
between cabinets and unit. When moving unit, do not
crimp, kink or crush water supply line.
11
Pull supply tubing forward under unit.
Note: DO NOT use plastic water lines.
13
Connect supply tube to water valve using
a 1/2" wrench. Note: DO NOT overtighten.
45