Advertisement
Menu Introduction:
Usage Instructions:
1. Install Batteries
Open cover, put into two A4 alkaline batteries, and then press Power/Scan button
2. Insert SD Memory Card
Do not force to insert, it will damage scanner and SD card
3. Format SD Card
Press "FORMAT" button, "F" shows on display, then press "SCAN" and it begins to format SD card.
When SD card sign on display stop to light, it means it finished formatting.
4. Set Resolution, Scanning form and Scanning color
Advertisement
Need help?
Do you have a question about the 01 and is the answer not in the manual?
Questions and answers
Tried to set the white balance. Did it incorrectly. Error Light is now on permanently and scans are dark. How can I resolve the problem. Note: before I screwed up the scans were fine.
How to set time, date, etc
How do I enter the batteries into the scanner