Quick Installation - ViewSonic G510b User Manual

Lcd display with landscape & portrait display modes full 15" diagonal viewable screen
Table of Contents

Advertisement

Quick Installation

1 Connect power cord and AC/DC
adapter
2 Connect video cable
• Make sure both the LCD display and
computer are turned OFF
• Remove rear panel covers if necessary
• Connect the video cable from the LCD
display to the computer
Macintosh users: Models older than G3
require a Macintosh adapter. Attach the
adapter to the computer and plug the video
cable into the adapter.
To order a ViewSonic
contact ViewSonic Customer Support.
3 Turn ON LCD display and
computer
Turn ON the LCD display, then turn ON the
computer. This sequence (LCD display
before computer) is important.
NOTE: Windows users may receive a
message asking them to install the INF file.
This is on the CD.
4 Insert the ViewSonic Wizard CD
into the computer's CD drive.
Follow the on-screen instructions
If your computer does not have a CD-ROM
drive, see "Customer Support."
(1) Wait for the CD-ROM to auto-start.
NOTE: If the CD-ROM does not auto-start:
double-click on the CD-ROM icon in the
Windows Explorer, then double-click on
viewsonic.exe.
AC IN
Rear panel
covers
Power cord
and AC/DC
adapter
AC outlet
(wall socket)
®
Macintosh adapter,
Computer
power cord
4 Wizard CD (continued)
(2) Follow the on-screen instructions.
5 Audio Installation (optional)
• Speakers Connect the audio cable (lime-colored) to
the AUDIO OUT port of your computer's sound
card, then to the LCD display's AUDIO IN port
(see illustration below).
• Microphone Connect the microphone cable (pink-
colored to the MIC IN port of your computer's
sound card, then to the LCD display's MIC OUT
port (See illustration below.)
6 Windows users: Set the timing
mode (resolution and refresh
rate)
Example: 1024 x 768 @ 60 Hz.
For instructions on changing the resolution
and refresh rate, see the graphic card's user
guide.
Installation is complete. Enjoy your new
ViewSonic, LCD display.
To be best prepared for any future customer
service needs: print this user guide and write
the serial number in "For Your Records" on
page 2. (See back of LCD display.)
You can register your product online at the
website for your region. See the Customer
Support table in this guide.
The ViewSonic Wizard CD-ROM also
provides an opportunity for you to print the
registration form which you may mail or fax
to ViewSonic.
ViewSonic
Video
cable
Audio
cable
VG510b/VG510s
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vg510bVg510s

Table of Contents