Jensen CMN86 Installation & Owner's Manual page 17

CMN86 OPERATION
Cameras & Auxiliary Input
Rear Camera Connect an optional rear camera to the Rear Camera
inputs (Yellow RCA connector for video and Black
RCA connector for audio). Refer to the wiring diagram
for details.
Manual selection - Touch the REAR CAMERA icon
from the Main Menu or from any operational mode
(when enabled) to select camera mode. Touch the top
left area on the screen to exit camera mode.
Note: The manual mode is for dedicated cameras
that are ALWAYS on while driving, it is not meant for
cameras that are connected to the vehicle's reverse
light.
The unit will automatically select camera mode when
connected to the reverse lamp circuitry.
Note: The external video output is not active when
using the rear camera input.
Connect an optional front camera to the Front
Front Camera
Camera inputs (Yellow RCA connector for video;
there is no audio connection for a front camera. Refer
to the wiring diagram for details.
Auxiliary Input Connect an optional audio source into the rear RCA
input.
Select AUX IN from the Main Menu to listen to audio.
Adjust volume on the external audio source as
needed (if connected to the headphone output of the
device).
17