La Crosse Technology 513-1918B Quick Start Manual

ATOMIC DIGI TAL WALL C LOC K
W IT H INDOOR /O UTDOOR TEMPERAT U RE
QU ICK START G UIDE
MODEL: 513-1918B
DC: 102819
Find your full manual and product information here:
POW ER U P
1. Insert 2-AA batteries into your Outdoor Sensor.
2. Insert 3-AAA batteries into your Digital Clock.
3. Once the Outdoor Sensor is reading to your clock, place it
outside in a shaded location to protect it from the sun's heat.
Watch sensor mounting video:
Outdoor Sensor
ATOM IC TI M E SI GNAL - W WVB
• Your Clock will automatically search for the Atomic Time Signal at
UTC 7:00, 8:00, 9:00, 10:00, and 11:00.
• Press the PLUS (+) button to manually start or stop search for the
WWVB Atomic Time Signal.
• While searching, the Tower Icon
be solid when the WWVB Signal is received by your clock.
• For information about WWVB Atomic Time visit:
bit.ly/laxtech_support
bit.ly/TH_SensorMounting
Digital Clock
TX191
513-1918B
AAA
AAA
AAA
will flash. The Tower Icon will
bit.ly/AtomicTime
Page 2
SE T T I N G S
1. Hold the SET button to enter the Settings Menu.
2. Use the + or - button to adjust values.
3. Press the SET button to confirm and move to next item.
Settings Menu Order:
• Language English | Spanish | French
• Beep ON | OFF
• Atomic ON | OFF
• Daylight Saving Time
- DST AUTO ON (Gain 1 hour in spring, lose 1 hour in fall)
- DST OFF (Remain in Standard Time all year long)
- DST ON (Remain in Daylight Saving Time all year long)
• Time Zone
• Hour
• Minutes
• Year
• Month
• Date
• Fahrenheit | Celsius
Language: Whichever language is selected, the following
instructions and weekday will be presented in that language.
Weekday: Weekday will set automatically when Year, Month and
Date are set.
Page 3
TIME ZONE
AST = Atlantic
EST = Eastern
CST = Central
MST = Mountain
PST = Pacific
AKT = Alaska
HAT = Hawaii