Declaration Of Ce Compliance - Nuova Mondial Mec MANTA Series Owner's Manual

See page 18 of the Manta Series manual.
See page 18 of the Manta Series manual.
See page 18 of the Manta Series manual, sections 1, 2, 3, 4, 5, 6 and 7.
7] Replace the drive belt when it starts to deteriorate and the adjustment of the belt tensioner (REF.43/44) is not
sufficient to keep it tight.
8] If the pump stops working, have the fuse located in the motor box (REF.27) checked by a qualified technician. If this
fuse burns out again, have the pump replaced.
See page 18 of the Manta Series manual.
The machine is constructing in accordance with Community Directives pertinent and applicable at the time of its market introduction.
NUOVA MONDIAL MEC conducts self-certification for CE markings purposes.
Nuova Mondial Mec S.r.l., assuming full responsibility, declares That the machine:
Commercial Denomination
Function ............................................... :Stone cutting and yard masonry machine
Model ................................................... :__________________________________________
Serial number ....................................... :__________________________________________
Construction Year .................................. :__________________________________________
MACHINES
2006/42/CE
Cerasolo date
Nuova Mondial Mec S.R.L.
MANUALE SERIE MANTA
MANTA SERIES MANUAL
SPARE PARTS
OPTIONAL ACCESSORIES
MANTA LX VERSION
MAINTENANCE AND CLEANING OF THE MACHINE
NOISE EMISSION
CE DECLARATION OF CONFORMITY
DECLARATION OF CONFORMITY
According to Annex IIA Directive 2006/42/CE
: yard cutting machine
Meets community directives concerning:
ELECTROMAGNETIC COMPATIBILITY
2004/108/CE
AND WHERE APPLICABLE REGULATIONS
EN 12100-1:2003 / EN 12100-2:2003 - EN 12418:2001 - EN 60204-1:2006
ELECTRIC MATERIAL TO BE USED
WITHIN SOME TENSION LIMITS
2006/95/CE
Nuova Mondial Mec Srl
Mr. Marco Ballarini
(Director)
pag.20