Manta Lx Version - Nuova Mondial Mec MANTA Series Owner's Manual

N.B.
We do not manufacture diamond blades, and are obviously unable to guarantee the quality of articles that we have not
produced. Levels of noise emission may vary according to the type of blade fitted. The above values are only indicative,
given the wide range of blades available commercially. To safeguard the hearing, it is compulsory to use ear protection
muffs or ear-plugs, which can be obtained from any pharmacist's shop.
See page 16 of the Manta Series manual.
See page 16 of the Manta Series manual.
The identification plate bearing the type or model of the machine, with the serial number and the motor name and data
is located on the front of the motor protection cover. PHOTO 22 PAGE 4
TYPE
120 LX
150 LX
200 LX
TB 120
N.B.
For the voltage and the power of the machine to make reference the identification nameplate.
See page 23 of the Manta Series manual.
1] The control for switching the machine on and off is located on the numbered shoulder. PHOTO 23 PAGE 4
For sections 2, 3, 4 and 5, see page 17 of the Manta Series manual.
6] Operator position. PHOTO 24 PAGE 4
7] Manta LX has a cut-out switch with a minimum coil. The ON button is located at the centre of the control box, on the
right. The OFF switch is an emergency mushroom button located at the centre of the control box, on the left.
See page 17 of the Manta Series manual.
See sections 1, 2, 3, 4, 5
7] It is advisable to use a forklift truck for all movements of the machine, as its considerable weight could make manual
movement very difficult.
8] It is absolutely prohibited to attempt to lift machines of this type with only 2 persons. The great weight of the machine
could cause injuries to the persons or damage to the machine.
*
This section differs slightly from the one given in the one given in the Manta Series manual. The number of persons necessary for liftin the machine is 4
and not 2.
Nuova Mondial Mec S.R.L.
MANUALE SERIE MANTA
MANTA SERIES MANUAL
GENERAL INFORMATION
PURPOSE OF THIS MANUAL
IDENTIFYING THE MACHINE
MANTA LX SERIES TECHNICAL DATA
CUT LENGTH DEPTH
Cm Cm
120 13
150 13
200 13
100 25
INSTRUCTIONS FOR CORRECT USE
TRANSPORTING THE MACHINE
*
and 6 on page 17 of the Manta Series manual.

MANTA LX VERSION

Ø DISC MOTOR
mm Kw
400 3
450 4
450 4
650 4
INSTALLATION
FITTING BLADES
LxBxH WEIGHT
Cm Kg
195x80x87 190
232x80x87 220
278x80x87 320
195x80x87 190
pag.19